Beautiful, thank you for sharing this unique idea! :)

And for what reason?

The handle did not fully print Why I do not know

You gave my profile a bad review - I'm always trying to help users, but for that I need at least some error description. The profile and files are certainly complete, as you can see from the other reviews. If it came loose, your build plate might need cleaning.

Turned out very good, thank you for sharing! :)

May I inquire which filament was used? I would like to print this again in that color

bambulab Indigo Purple (10701)

Very nice, thank you for sharing! :)

That truly delights me, thank you for your review :)

I suspect your print bed isn't 100% clean – I've never had problems with the knob on PEI, and Bambu Studio automatically applies a brim if necessary These textured print surfaces unfortunately generally have very poor adhesion compared to proper PEI, so a brim might indeed be necessary since you also used them for the knob

My first attempt with the lid was on PEO My second failed attempt on the original Bambu PEI sheet after cleaning with isopropyl alcohol, and on the third attempt at 50% on PEI it worked I think the rapid movements caused it to detach I also changed the knob’s position from the center of the plate to the upper left so that the extruder wouldn’t have to constantly move back and forth Ultimately, I don’t know what caused the success, but the main thing is that it worked 😂👍🏾

Its called the seam, and you can't get rid of it with a 3d printer - as you said, its the start and end of each line. The slicer hides them on corners if there are some, but on round objects the seam will always be exposed. You can use scarf seams to make them less noticeable, but you need to manually calibrate it first for your filament.

thx for explaining. Fortunately it is not visible from the outside.

Thank you for your review! The knob never came off for me – you might need to clean the print bed again – water and a simple dish soap work best, by the way – this is often more effective than wiping with alcohol due to the volume

The bed was already cleaned, both with isopropyl alcohol and dish soap, I think the Mini might have too much power and simply pushes it around, regardless, with a little more support it also worked perfectly.

Wow, this is the largest one I've ever seen. Thank you for your review! :)

You can only rate if you printed it from the app or Bambu Studio on a Bambu Lab printer. Then you should see this in the rating tab in the app or on MakerWorld. Anyway, I'm glad you liked them! :)

Thank you for your kind reply. I'm using an ender 3, v2 which was given to me a couple of weeks ago. So much to learn. I really appreciate your models. Guess I need to think about upgrading to Bambu. The faster print speed is enticing.