iPhone Charging Stand A Modern MagSafe Cradle

Copyright Claim

iPhone Charging Stand A Modern MagSafe Cradle

Boost
464
955
126

Print Profile(3)

All
A1
P1S
P1P
X1 Carbon
X1E
X1
A1 mini

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
3.4 h
1 plate
4.9(82)

Large Charger 0.2mm layer, 2 walls, 15% infill
Large Charger 0.2mm layer, 2 walls, 15% infill
3.4 h
1 plate
4.5(2)

Optimized for translucent PETG
Optimized for translucent PETG
3.5 h
1 plate
5.0(1)

Open in Bambu Studio
Boost
464
955
126
110
1.1 k
626
Released

Description

Patreon Support


If you would like to support my work I now have a patreon at https://www.patreon.com/AbstractiaDSGN. Tiers range from simple monthly support to say thank you for my ongoing work to full commercial licences if you would like to sell physical versions of my prints in your store. Thank you to all supporters

Wave MagSafe Phone Stand - Bedside Edition

Inspired by a previous clock design ive made this is a sculptural phone stand with a distinctive wave pattern, specifically designed for the official Apple MagSafe charger. The flowing ridged design transforms your charging setup into a functional piece of desk art while maintaining perfect viewing angles for your iPhone. Perfect for bedside mode or as a modern desk accessory.

The thoughtfully designed base works best with a sticky pad (not included) to anchor it securely, ensuring smooth one-handed removal of your phone while the stand stays put.

Key Features:

  • Precisely sized for the official Apple MagSafe charger
  • Unique wave pattern design adds visual interest
  • Dual orientation - use in portrait or landscape
  • Add your own sticky pad to the base for rock-solid stability
  • Easy one-handed phone placement and removal when using a sticky pad
  • Cable management integrated into the design

A practical charging solution that doesn't compromise on style, inspired by modern wave patterns and thoughtfully engineered for daily use.

Boost Me (for free)

Boosting is Free and helps support me so its super appreciated! Daily designs take time and im saving for a new printer :D

Commercial Licence Information
Commercial licences are now available via Patreon at https://www.patreon.com/AbstractiaDSGN There are also tiers if you would just like to support my work and don't need a commercial licence. Thank you to all supporters

Support Me Directly

If you love my daily designs and would like to make a one off gesture of support you can buy me a coffee here
buymeacoffee.com/abstractiadsgn

 

Socials To Follow for Daily designs

Instagram

TikTok

Twitter

Patreon

 

Some of My Other Work

Be sure to follow for daily designs

Bill of Materials

Maker’s Supply Kits and Parts
Buy Now
Download BOM

Comment & Rating (126)

Please fill in your opinion
(0/5000)

Print Profile
0.2mm layer, 2 walls, 15% infill
The print came out great and I look forward to printing some of your other models. Well done!
The designer has replied
1
Reply
thank you 🙏
0
Reply
Boosted
Damn, looks smooth, did you modify anything in the profile? Also, what fillament did you use?
0
Reply
Replying to @timsonbob :
Thanks. I don't think I changed anything. Possibly set it to .16mm layers. I used Inland White Marble PLA which does help hide some of the layer lines. You can see them in person, but it's pretty subtle.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
beautiful print thank you!! I stuffed an Anker charger in there so ignore that part but the print itself is stunning!
The designer has replied
0
Reply
its a circle still so a bit of maths and you could just scale it up! :D
0
Reply
Replying to @dkdsgn :
Hahaha I totally will, I plan to use this one for the apple charger at work and scale this up appropriately for my anker at home <3
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Really nice aesthitic! I’ve seen some designs which provide a cap with a hollow space to fill with sand to make weighted at the bottom. Have you expiremented with those designs instead of sticky tape?
The designer has replied
0
Reply
I’ve not it’s a good idea just feel like the tape is more accessible than sand for most users. something I’ll think about in the future.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
The print is good, but I found the angle a bit too low for my bedside. Is better if it’s on a desk and in standing up, but not quite what I’d hoped. love the style though
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
looks sweet, although I tried getting it to print as a translucent piece which was obviously a bit too ambitious for something of this shape nice that even a third party MagSafe fits too
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
top
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
printed very nicely. the MagSafe doesn’t fit snug and it the hole is just a bit .5-1 mm too large. also, my 13 pro does not sit flush when charging as the cameras hit the back of the stand. not for me.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
A lovely print The model itself is a little lightweight But all is well
Show original
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
Made a cool Christmas prezzy
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Superb
Show original
0
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Get Commercial License