Gift Card Present Box by SpoolDesigns

SpoolDesigns

Household>Festivities

Print Profile(4)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

Standard Gift Card - Replaceable Tray Snap Lid

Designer

3.2 h

3 plates

4.9(160)

Standard Gift Card - Full Snap Lid (no replaceable tray)

Designer

3.2 h

3 plates

5.0(30)

Snap Lid Variations

Designer

3.8 h

7 plates

4.8(5)

Standard Gift Card - Magnetic Lid/Box

Designer

4.9 h

6 plates

5.0(3)

Open in Bambu Studio

Boost

676

1527

268

231

1.6 k

1.1 k

Released

Description

Gift Card Present Box

Follow my MakerWorld profile for more updates on my latest models and projects!

Boost Me (for free)

Give me a gift!

Designer Profiles

Use Standard Gift Card - Full Snap Lid (no replaceable tray) if you don't plan on re-using the box.

Use Standard Gift Card - Replaceable Tray Snap Lid if you would like to reuse the box with different trays in the future.

Use Snap Lid Variations

Fat Prongs if you are having issues with the prongs breaking (this may happen on old/cheap filament, I recommend you dry it)
No Prongs if you don't want the gift card holder on the lid
0.2 Tolerance if the tray is fitting to tight, you can use this for a better fit

Use Standard Gift Card - Magnetic Lid/Box if you would like the lid to come off a little easier

Requires 4 D3x1mm Round Magnets from Maker Supply
The magnets will need to be glued into the lid and box

Message me or comment here if you have any issues, I will do my best to resolve them!

Features include:

Ribbons are flush with the box
Ribbons wrap fully around the entire box
Snap on lid design (with a magnet option)
Card holder options for different tolerances
Slimmed box for reduce print time
Customizable gift card tray for future upgrades or different holding mechanisms

Assembly

No glue assembly required for snap profiles, just snap the ribbon and bow into place.

Slide gift card tray (if using that profile) into lid and assemble the shorter ribbons first
Followed by the longer ribbons.
Add gift card of choice!

Printing Instructions

.2mm layer height

Hello there! 👋

I genuinely appreciate your support and interest in my 3D models. Boosting and liking my models, as well as following my profile, not only brightens my day but also helps me grow and create more of what you love in the world of 3D modeling. Thank you—your support means everything to me!

Also check out my other regularly published models.

Bill of Materials

Maker’s Supply Kits and Parts

D3x1mm Round Magnet (20PCS) - CA014

$1.79 USD

B-CA014

× 1

Bambu Filaments

Marine Blue

A01-B3-1.75-1000-SPLFREE

× 1

Crimson Red Sparkle

A08-R2-1.75-1000-SPL

× 1

Ivory White

A01-W2-1.75-1000-SPLFREE

× 1

Mistletoe Green

A00-G2-1.75-1000-SPLFREE

× 1

Buy Now

Download BOM

Comment & Rating (268)

@nikkolaus

Boosted

Thanks for helping me prepare for the upcoming holiday! Gotta love it when 3D printing stuff is cheaper than going out and buying a paper greeting/holiday card for everyone... (The haircut card is just a sample test. In its place will be a $25 gift card.) Hint for everyone: Print the wide clip.

(Edited)

The designer has replied

@SpoolDesigns

😍 Thank you so much for sharing! Love this!

@nikkolaus

Boosted

Replying to @SpoolDesigns :

Here's the final, with the actual cards :P

@SpoolDesigns

Replying to @nikkolaus :

Amazing!🦝

@nikkolaus

Boosted

Print Profile

Standard Gift Card - Full Snap Lid (no replaceable tray)

The pincers to hold the gift card were fused together but only on one side. The rest of the model seemed great though. Ribbons laid in the tracks well. The lid fit was very tight (Almost too tight! The ribbons were flexing up out of the track, if the ribbon bow was pulled, as a child would do.) Admittedly, I used a fairly cheap white filament - might retry with the expensive stuff. -- 9/10 --

The designer has replied

@SpoolDesigns

Thanks for the comments. Did you happen to print with a 0.6 nozzle?

@nikkolaus

Boosted

Replying to @SpoolDesigns :

Nope, a 0.4 nozzle. The fat prongs lid file fixed the issue.

@SpoolDesigns

Replying to @nikkolaus :

Oh wonderful, thanks for letting me know.

@LloydTapper

Boosted

Beautiful box and fits together nicely. Though I did adjust the width of the gift card tray from 9.06 to 8.75 so I could slide it in and it still had a snug fit. Seems other people had that issue also, and some did not. Perhaps include a couple different sizes for people? I'm also curious as to why the try is printed separate from the lid though. Would the slicer not handle the bridge okay? Printed with a 0.2mm nozzle (because I happened to have that loaded), with Forest Green and Gold Silk PLA.

(Edited)

The designer has replied

@SpoolDesigns

Thanks for the boost! You aren't wrong, it can be printed as part of the lid (without it being a separate piece). It is intended so that the box can be reused for other things besides gift cards, but happy to release one as a single lid as well, good idea.

@SpoolDesigns

I've added a plate to the profile with the lid/tray combined, thank you for your feedback!

@nadnerb33

Print Profile

Standard Gift Card - Replaceable Tray Snap Lid

printed great in Bambu sparkle green and esun fire engine red

The designer has replied

@SpoolDesigns

Amazing color choices, thanks for sharing!

@troyrudd

Boosted

Just stopping by to hand out a 2nd boost! :)

The designer has replied

@SpoolDesigns

Thank you so much, really appreciate it :)

@user_2492629601

Boosted

The piece that holds the gift card has snapped twice on me now. Any suggestions for how to strengthen that piece?

The designer has replied

@SpoolDesigns

I am releasing a profile in the next half hour that will print the tray and lid together! Hold tight, I'll let you know when its out. Thanks for the feedback!

@SpoolDesigns

To be clear, the tray itself snapped, or the prongs that hold the card?

@user_2492629601

Boosted

Replying to @SpoolDesigns :

Thanks for the quick response. It was the prongs that hold the card that snapped on me. Looking forward to trying your new version. This is such a beautiful design!

@Starsjourney

Kids gift cards are ready to go! thank you!

The designer has replied

@SpoolDesigns

🎁🎁🎁🎁🎁 thanks for sharing!

@elwe

Print Profile

Standard Gift Card - Replaceable Tray Snap Lid

Excellent model, thank you for it

The designer has replied

Show original

@SpoolDesigns

Thank you for sharing your prints! Happy holidays!

@user_1991191955

Boosted

Print Profile

Standard Gift Card - Replaceable Tray Snap Lid

very nice

The designer has replied

@SpoolDesigns

Thank you! Happy Holidays!

@hookuum

Boosted

Print Profile

Standard Gift Card - Replaceable Tray Snap Lid

everything fits perfectly what a great idea. thank you for sharing

The designer has replied

@SpoolDesigns

Thank you for sharing and the boost, really appreciate it, happy holidays!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.