Wavy Handbag by NoBeer

NoBeer

Fashion>Bags

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

Bag, 0.8mm nozzle, 0.32mm layer, 1 walls, 0% infill

Designer

5.6 h

2 plates

5.0(5)

Straps, 0.8mm nozzle, 0.24mm layer, 2 walls, 10% infill

Designer

2 h

2 plates

5.0(3)

Open in Bambu Studio

Boost

150

268

140

Released

Description

<<<PLEASE BE AWARE>>>

This bag (first file) ONLY works with SPIRAL VASE MODE

Wavy pattern handbag.

Print in spiral vase mode, with TPU 95A and 0.8mm nozzle.

Available in two sizes. There are not simply scaled up, the big one has larger wave amplitude.

Assemble

Cut out a hole of approximately 5mm diameter, and connect straps with pin.

Connectors for longer strap could be found in the second print file.

The small one printed at 0.32mm layer height, large one at 0.4mm. Not much difference, just for you information.

Comment & Rating (12)

@STLDad6

Print Profile

Bag, 0.8mm nozzle, 0.32mm layer, 1 walls, 0% infill

came out nice

The designer has replied

@NoBeer

Nice color, and I noticed the waggling on top. The bag doesn't seem strong enough to stand still. I thought 0.8 nozzle could handle it, but maybe its shape needs some tweaking.

@fivepetals

Print Profile

Straps, 0.8mm nozzle, 0.24mm layer, 2 walls, 10% infill

Handles printed with no issues. Used the handles for the larger size handbag and configured for a medium length strap.

@fivepetals

Print Profile

Bag, 0.8mm nozzle, 0.32mm layer, 1 walls, 0% infill

Turned out great. Printed on X1 Carbon, with Sunlu TPU, generic TPU settings and spiral vase settings. Handles printed on a seperate plate.

@STLDad6

Print Profile

Straps, 0.8mm nozzle, 0.24mm layer, 2 walls, 10% infill

sweet

@JewelsCreations

my print was a waste of filament!! created the handbag but has no opening just a solid handbag like wtf

The designer has replied

@NoBeer

Have you changed the print settings? The bag should be printed in Spiral Vase Mode, which is preset in the first file. The model is a soild block. Spiral Vase mode will print it with single wall and 0 infill. Attached image are print preview and model view.

(Edited)

@user_2035564558

Boosted

this is beautiful I’m going to print it out and let you know

@user_1665850806

Print Profile

Bag, 0.8mm nozzle, 0.32mm layer, 1 walls, 0% infill

@msaleem

Print Profile

Straps, 0.8mm nozzle, 0.24mm layer, 2 walls, 10% infill

@cblab

Print Profile

Bag, 0.8mm nozzle, 0.32mm layer, 1 walls, 0% infill

@butt_egg

Print Profile

Bag, 0.8mm nozzle, 0.32mm layer, 1 walls, 0% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(2)

Description

<<<PLEASE BE AWARE>>>

This bag (first file) ONLY works with SPIRAL VASE MODE

Comment & Rating (12)

License

Related Models

One-Piece Printed Fabric Phone Handbag

Expanding Dryer for Plastic/Silicone Bags

Crochet Handbag Bottom – Circle Base for DIY Bags

Desk hook for backpack, bag or handbag