Stylish Headphone Stand (two sizes) by MalcTheOracle

MalcTheOracle

Tools>Organizers

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

Regular, 0.2mm layer, 2 walls, 15% infill

Designer

2.4 h

2 plates

5.0(3)

Max, 0.2mm layer, 2 walls, 15% infill

Designer

3.7 h

2 plates

4.6(5)

Open in Bambu Studio

Boost

221

163

Released

Description

Introduction

Do you have a head? Do you have sound thingies that you strap to your head? Do you occasionally take the headphones off your head and need somewhere to place them?

Do you wish to make that solution stylish?

Of course, you do!

Stylish Headphone Stand

Let me introduce you to the Stylish Headphone Stand. It is designed stylishly and is available in two sizes. It is entirely printable, with all parts provided.

Commercial License

Do you want to sell prints of this model? You can obtain a commercial license by purchasing a membership from my Patreon.

Sizes

Regular
225mm tall, the upright is 40mm wide by 40mm deep.
The base has an 82mm diameter.
Max
225mm tall, the upright is 40mm wide by 50mm deep.
The base has a 122mm diameter.

Regular will suit most headphones, if you have a heavy set of headphones that could benefit from a deeper upright and a wider base, choose the Max.

Both stands include four capped screws in case you accidentally break one, you only need two for the stand.

Do NOT turn them too tight for obvious reasons.

Filaments Used in Photos

Bambu Lab - PLA Metal Iridium Gold
Bambu Lab - PLA Metal Cobalt Blue

headphone

stand

stylish

Bill of Materials

Bambu Filaments

Iridium Gold Metallic

A02-Y1-1.75-1000-SPL

× 1

Cobalt Blue Metallic

A02-B2-1.75-1000-SPL

× 1

Buy Now

Download BOM

Comment & Rating (18)

@ddastardlyart

Print Profile

Max, 0.2mm layer, 2 walls, 15% infill

Printed great, however, I wouldn't suggest doing everything as a single plate, the bolts to hold the parts together need to be printed with more walls and infill to keep from shearing.

The designer has replied

@MalcTheOracle

Thank you, I really appreciate it. The nuts have less than 5% of volume as infill or space. The design and size of the them was carefully considered to not require any additional wall settings as they provide no additional sheer strength. I created multiple prototypes to ensure this.

@MalcTheOracle

Thank you, I really appreciate it. Ditto to what I said on your other rating.

@user_2992859657

Boosted

Print Profile

Regular, 0.2mm layer, 2 walls, 15% infill

printed well but, some adhesion issues. got a very prompt response from the designer with tips on how to improve the print. really appreciate the help as I’m very new to 3D printing.

The designer has replied

@MalcTheOracle

Thank you, I really appreciate it. Depending on which printer you are using, you may wish to tweak the bed temp or reduce/remove any draughts. potential.

@user_2992859657

Boosted

Thank you for the prompt reply. I’m new to the 3D printing world. Using the A1 and I appreciate the suggestion. I’ve only been printing for like 2 weeks so, have a lot to learn.

@glogg

Print Profile

Max, 0.2mm layer, 2 walls, 15% infill

Awesome design. Used PETG. Worked great. Thanks! Also, love the description. Yes, I have a head.

The designer has replied

@MalcTheOracle

Thank you, I really appreciate it. I designed it for people with a head, a match made in heaven!

@raphire

Boosted

Print Profile

Max, 0.2mm layer, 2 walls, 15% infill

Came out great, unfortunately the screwpoints on the base are a weakpoint. Could do with some strengthtening

The designer has replied

@MalcTheOracle

Thank you, I really appreciate it. They are strengthened, remember it is plastic, over tightening should be avoided. I mention this in the description. “Both stands include four capped screws in case you accidentally break one, you only need two for the stand. Do NOT turn them too tight for obvious reasons.”

@D.RamosBR

Print Profile

Regular, 0.2mm layer, 2 walls, 15% infill

The designer has replied

@MalcTheOracle

Thank you, I really appreciate it.

@MR.Flex

Print Profile

Max, 0.2mm layer, 2 walls, 15% infill

The designer has replied

@MalcTheOracle

Thank you, I really appreciate it.

@One7Seven

Print Profile

Max, 0.2mm layer, 2 walls, 15% infill

The designer has replied

@MalcTheOracle

Thank you, I really appreciate it.

@user_4260916697

Print Profile

Regular, 0.2mm layer, 2 walls, 15% infill

The designer has replied

@MalcTheOracle

Thank you, I really appreciate it.

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.