Dune Weaver - Wooden Top by Tuan NguyenMakerWorld: Download Free 3D Models

Tuan Nguyen

Education>Engineering

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

H2D

0.2mm layer, 2 walls, 15% infill

Designer

11 h

2 plates

5.0(4)

PETG, PLA Sup Interface , 0.2mm layer, 3 walls, No Purge

13.3 h

4 plates

5.0(1)

Open in Bambu Studio

Boost

128

316

187

Released

Description

IMPORTANT: This is a replacement for the 3D-printed tabletop. Check out the Dune Weaver here: https://makerworld.com/en/models/841332#profileId-787553

This design leverages an IKEA OMBONAD tray as the sand bed. This eliminates the need to glue the base together, which can introduce unevenness to the sand patterns. It also elevates the look of the table, in my opinion. The tray is quite thick (10cm), so I recommend a strong N52 magnet. If possible, you should test the strength of your magnet before buying the tray.

Instructions:

You can skip the tabletop, and the pegs in my original design linked above
Line up the glass support, mark and drill a hole in the base to pass through the LED strip
Add the led strip with two-sided tapes to the inside of the glass support
Add a layer of faux leather (optional) to reduce the grinding noise
Add sand, a steel ball, and the glasstop
Enjoy!

Thanks Scatterthought on Reddit who suggested the idea: https://www.reddit.com/r/BambuLab/comments/1h4lr3e/comment/lzzh4lf/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button

Boost Me (for free)

If you like my work, a boost would be appreciated! Want to buy me a coffee ☕️? https://www.paypal.com/paypalme/tuanchris

Bill of Materials

List other parts

IKEA OMBONAD tray x 1: https://www.ikea.com/ca/en/p/ombonad-tray-walnut-50504734/

Download BOM

Comment & Rating (12)

@jaerin

Boosted

Here are some tips for printing these channels significantly easier using PLA as a support interface for PETG or vice versa. Slow down the support so that they can lay down on each other accurately. This doesn't add significant amount of time, but will allow for the PLA and PETG to play nice together. Use Snug Normal supports and this will tuck all the support into the channels. Add a little more gap to ensure that the support does not connect to the back of the channel for easier removal. Remove the Purge Tower as it is not needed. Also remove the Flush into objects or the flushing will contaminate the material of the main object and make the layer very weak at the layer of change. Ensure that the filament Flushing Volume is set to at least 350 for both. As you can see you get extremely clean removal of the support and the PLA layer just falls out.

@jaerin

Boosted

Also for a snug fit in the tray for the final piece I had to increase the size of one of the pieces in only the X/Y directions by 100.72%. This gave me a perfect snug fit all the way around.

@Thokoop

Boosted

Replying to @jaerin :

wow, great info. I’ll test these settings out and will incorporate it then in the project file of the remix I made.

@user_4220996622

Print Profile

0.2mm layer, 2 walls, 15% infill

almost finished and printed great!

@Rengoku9

Looks great, in your description, you suggested using a stronger N52 magnet, which one did you end up using?

The designer has replied

@tuanchris

I'm using a magnet that I got lying around from a Phillips Hue sensor. It works okay, but the motions are not smooth. I'm ordering more magnets to test out and will update my instructions once they are here.

@Thokoop

Boosted

I ended up using an 20mm x 10mm magnet and it might nog be perfect but the motion is good enough for me. The end-result is amazing: https://youtu.be/2BRaXHGkRNA?si=egrsbtvoo20IS8b9

@Scatterthought

It looks amazing! I hope I'll find time to build one.

@jfbrunner

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_1958136712

Boosted

Print Profile

PETG, PLA Sup Interface , 0.2mm layer, 3 walls, No Purge

@user_1958136712

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

@Thokoop

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.