This is a small Christmas church that can be illuminated with an LED tea light.

The church is easy to print and then assemble.

There is a simple version with only the individual components and a Kit Card version, each as a version for X1, P1 and A1 models and A1 Mini model.

The house can be used with Bambu LED tea lights, but also with LED tea lights from other manufacturers. Conventional sizes fit.

Kit Card Version

The parts from the Kit Card are carefully removed from the frame with a knife.

It is best to use a sharp craft knife and a board as a base.

Be careful not to cut yourself.

Then the parts must be assembled as shown in the picture.

This works best if you first assemble the front wall with the bell tower, insert it into the base plate and then insert the other walls.

Just add a small LED tea light and you're done :)

If you print the model without a Kit Card, the removal from the frame is of course omitted.

Caution: Only operate with an LED tea light and not with a real flame!!!

Also take a look at the following matching model! Simply click on the picture :)

I would be very happy about a comment or a rating. Have fun with it :)
Of course you can also support me with a boost.