Skadis AMS Lite Mount by TimothySt

TimothySt

3D Printer>3D Printer Accessories

IP Report

Print Profile(3)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

CABLE DOWN

Designer

3.8 h

1 plate

4.9(301)

CABLE UP

Designer

3.7 h

1 plate

4.9(34)

CABLE DOWN, tree support, 0.2mm layer, 3 walls, 20% infill

4.2 h

1 plate

5.0(57)

Open in Bambu Studio

Boost

805

1836

521

423

2.5 k

1.9 k

Released

Description

I wanted to free up some desk space so I decided to hang my AMS lite on an Ikea Skadis board. So far it works perfectly.

Files:
There are multiple files, since there are two ways to mount the AMS Lite - with the cable facing upwards or downwards. Choose the orientation that suits you best. You can also print the mount and the pegs separately.

Printing:
The model can be printed on the Bambu Lab A1 mini.

Print the mount with 25%+ infill density and tree supports. For the hooks use 100% infill density. I used Bambu Lab PLA Tough for everything, but I would recommend using PETG for everything.
You only need tree supports for the larger overhangs, not for the screw holes or peg holes.

Assembly:
The 4 pegs can simply be fitted into the holes and then the whole thing hangs securely on your Skadis board.

Stability:
I have used this mount with 4 spools on the AMS Lite and have had no stability issues, but please test it for yourself.

Enjoy :)

Also, check out my Skadis Caliper Mount:

Boost Me (for free)

If this model helped you, feel free to boost me :)

Comment & Rating (521)

@Ruarc_

Boosted

Print Profile

CABLE DOWN, tree support, 0.2mm layer, 3 walls, 20% infill

Printed very well on Sunlu PLA+. Feels extremely sturdy.

@Marta

Hi, does Sunlu's PLA+ still hold your AMS well full with all 4 rolls? Because I have Sunlu PLA+ and I'm undecided whether to print it with this or in PETG to be sure of the resistance. But I should buy PETG just for this reason...

@Ruarc_

Boosted

Replying to @Marta :

Yeah, until now I never felt like anything came loose or is unstable. The PLA+ works great in my opinion :)

@Marta

Replying to @Ruarc_ :

Thank you so much! :D

@jhujhustine

Boosted

this worked so well. ty so much!

@anderjaceb

What cover did you use over the ptfe tubes?

@jhujhustine

Boosted

Replying to @anderjaceb :

white cable sleeves from amazon.

@anderjaceb

Replying to @jhujhustine :

Alright, thanks!

@Appice

is it fine if its printed with Bambulab PLA ? i only have PLA filament and im not sure if i should print it or wait until i buy new filaments

@Dawgsfan157

I would like to know this too...

@user_4099601594

me three

@Aaron_Keene21

Replying to @user_4099601594 :

Me four.....

@Moose_Lord

Boosted

absolutely love this model, just wanted to post a summer warning though. I had the clip pieces printed in standard matte PLA as it was all I had back in the day. today it reached 30°C in my office and the temp stressed the clips enough to drop my AMS to the floor. make sure to print with a more thermally stable material if you haven’t already! redid the clips in PLA-CF for heat resistance, but I may switch two to PETG once I have more.

@user_2835348621

My room is almost always above 32 degrees. I also printed with pla and the ams is hanging above my printer. I'm stressed like crazy because I'm not at home. 🥲

@user_198658486

hi, which box do you have on the left?

@Opie5

i have a very hard time believing that those clips would deform at 30c. that is not that warm. thats only 86F. if pla deforms at that temp it would not be usable.

@smashd

Boosted

Print Profile

CABLE DOWN

great print, thanks

@smashd

Boosted

the pegs seem rock solid by the way, even had to lightly hammer them in, perfect fit

@Julasse

Print Profile

CABLE DOWN

Es passt perfekt an die Wand und auch das AMS passt super auf den Halter.

@TimothySt

Super! Freut mich zu hören!

@ChrisDoubleL

Boosted

Print Profile

CABLE DOWN

Absolutely brilliant, I can finally use my AMS! Printed in PETG, feels very sturdy and secure. Thank you

@TimothySt

Awesome! Glad it helped you too!

@TopicHopser

Boosted

What is the difference between "cable up" and "cable down". A long time ago I printed "cable down" because my cable was too short. In the meantime I ordered an extension cable and now print "cable up". Both prints are identical. Then I opened both profiles in Bambu Studio. If I turn one by 180° they are identical. I am confused.

The designer has replied

@TimothySt

There is a subtle difference in orientation. The AMS lite only fits on the mount one way (as you can easily try), so do the pegs. So if choose the "up" option then the cable will come out the top side when you mount it.

@user_2622019289

Replying to @TimothySt :

Same question: I printed "cable down" and now want to change orientation; do I have to print the whole "cable up" model again? there's no way to reuse anything?

@kexi

Boosted

Print Profile

CABLE DOWN

Printed perfectly fine with PETG. Seems pretty sturdy. The pegs going into the bottom were a super tight fit and hard to get in but I guess that's a good thing :D

@Johnny_P

Print Profile

CABLE DOWN

Works great! Freed up space on my desk! Printed in Tough PLA.

@TimothySt

Awesome!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Get Commercial License