Clock by DAVID HOLEČKO

DAVID HOLEČKO

Household>Decor

Print Profile(4)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 4 walls, 25% infill

Designer

54 min

1 plate

4.7(9)

0.2mm layer, 4 walls, 25% infill

Designer

1.9 h

1 plate

4.8(6)

with Seconds Hand (white dot)

2.8 h

2 plates

5.0(2)

circle in parts, 0.2mm layer, 4 walls, 25% infill

2.5 h

3 plates

Open in Bambu Studio

Boost

292

593

300

132

Released

Description

Since I received a clock-making kit with my BambuLab printer, I decided to create beautiful modern wall clocks that will look perfect on my wall.

Boost Me (for free)

Thank you for your support

Bill of Materials

Maker’s Supply Kits and Parts

Clock Components Kit-MH011

$8.00 USD

MH011

× 1

Buy Now

Download BOM

Comment & Rating (34)

@user_2467280334

Boosted

Print Profile

with Seconds Hand (white dot)

Great model, printed well on my P1S in Elegoo matte black PLA.

@ThePW

Print Profile

0.2mm layer, 4 walls, 25% infill

The design is pretty nice. I like the minimalistic look. Unfortunately the holes are to tight to fit. I tried to manually enlarge them but now they are to loose so you can’t get around a new print and adjusting the holes yourself.

@slowmo110

Boosted

Great print! love the simple look. holes for the hands fit pretty good off the print bed. cleaned hour hand with a drill so I didn't break it while pushing it on. thanks for the clock!

@user_1715314780

could you do a scaled down version ? for the a1 mini ? Not sure if the cool would be as good as this one because the space between the two pieces would be smaller but i really like your design and can't print it on my a1 mini

@visit1985

I've added a print profile that should suit your needs. Have fun!

@user_1715314780

Replying to @visit1985 :

printing it right now !

@user_247438283

Boosted

Prints really well thanks. Any advice on how to assemble it?

The designer has replied

@david.holecko

If it is difficult to insert, clean the hole in the hand with a 5 mm drill, then simply insert it.

@user_2679124303

The part showing the hours was so tight it pinched the inner revolving part. So gradually remove some of the inside until you can adjust the time on the back. For the other part maybe carefully heat the center hole before you stick it on the clock to "glue" it on.

@user_247438283

Boosted

thanks for the replies, there was a bit of filament stuck in a place where a hole should have been. invisible from the front, a bit of focussed pressure from behind popped it straight out. all assembled and keeping g good time. looks very sophisticated!

@droid3d

Nice. Simple. This belongs in the Clocks Design Contest.

@Hazzy42

Love the look. Fit right off the bed using the prinnt profile on the A1 with minimal clean up.

@Synkt

Print Profile

0.2mm layer, 4 walls, 25% infill

didn't fit my kit very well, not the designers fault. great model.

@3dprintedartuk

Boosted

Print Profile

0.2mm layer, 4 walls, 25% infill

Holes a little too tight for clock mechanism due to variances in filament. Hole Compensation will sort it out.

@3dprintedartuk

Boosted

Print Profile

0.2mm layer, 4 walls, 25% infill

Holes a little too tight for the clock mechanism. Will reprint with Hole Compensation adjusted...

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Print Profile(4)

Description

Bill of Materials

Comment & Rating (34)

License

Related Models

Highland Cow Desk Clock

Rolex Wall Clock replica

Box for Clock Components Kit-011

Remember you will die clock (Memento Mori)