Michelangelo (Tortues Ninja) hueforge
Michelangelo (Tortues Ninja) hueforge
Print Profile(1)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 133.33x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PETG JAYO Gray Transmission Distance: 2.5
PLA Jessie Premium Safety Orange Transmission Distance: 2.7
PETG JAYO White Transmission Distance: 6
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Gray
At layer #16 (1.36mm) swap to Safety Orange
At layer #20 (1.68mm) swap to White for the rest.
Commencer par le noir
à la couche #10 (0.88mm) changer pour le gris
à la couche #16 (1.36mm) changer pour le orange
à la couche #20 (1.68mm) changer pour le blanc pour le reste
Boost Me (for free)
Boostez pour retrouver de nouveaux modèles. Merci.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)