Victorinox 91mm Zelda Pattern Scale

Copyright Claim

Victorinox 91mm Zelda Pattern Scale

Boost
19
40
6

Print Profile(1)

All
A1 mini
P1S
P1P
X1
X1 Carbon
X1E
A1

0.12mm layer, 2 walls, 100% infill
0.12mm layer, 2 walls, 100% infill
Designer
1.9 h
2 plates
5.0(3)

Open in Bambu Studio
Boost
19
40
6
1
17
10
Released

Description

These custom-designed 3D printable plates are tailored for the Victorinox (91mm) Swiss Army Knife. it has the same dimensions as the original ones.

 

You have two options:

First, you can print the Pattern On Top Plate with higher success rate

Second, you can print the Pattern at the bottom for finer and smoother finish but it has to be monitored while printing

 

Smooth PEI plate is preferred over Textured PEI Plate for smoother result

No AMS profile currently (if you can please make one I don't have AMS)

 

Installation Instructions:

 

1. Remove the Original Plates:

• Use a small flat-head screwdriver or pry tool to carefully lift the edge of one of the original plates.

• Start at the lanyard hole or a corner where the plate is less tight.

• Slowly work your way around the plate, gently prying it off. Avoid excessive force to prevent damaging the knife.

 

2. Clean the Knife Body:

• Wipe away any residue or adhesive left from the original plates using a damp cloth.

• Ensure the surface is dry and free of debris.

 

3. Attach the 3D-Printed Plates:

• Align the 3D-printed plate with the knife body, ensuring the snap-fit tabs align with the corresponding points on the knife.

• Press the plate firmly into place starting from one end and moving toward the other until you hear a click or feel it snap securely -Don't worry about pressing it too hard it is normal.

 

Your Victorinox 91mm Swiss Army Knife is now customized with your unique plates!

Bill of Materials

Bambu Filaments
A00-Y4-1.75-1000-SPLFREE
× 1
Buy Now
Download BOM

Comment & Rating (6)

Please fill in your opinion
(0/5000)

Print Profile
0.12mm layer, 2 walls, 100% infill
Great print!
The designer has replied
1
Reply
Thank you very much!
0
Reply
Print Profile
0.12mm layer, 2 walls, 100% infill
Exelent! 0,4 nozzle, 0,12 layer 2 wals, 100% infill
The designer has replied
1
Reply
Thanks! I would like to see a photo of it if you could please
0
Reply
Looks awesome!!!
0
Reply
Print Profile
0.12mm layer, 2 walls, 100% infill
0
Reply
No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.