Owl
Copyright Claim
Owl
Boost
85
155
16
Print Profile(3)
Multicolor 4 Color 0.16mm layer, 3 walls, 15% infill
Designer
8.2 h
1 plate
Single material_0.16mm layer, 3 walls, 15% infill
1 h
1 plate
FUZZY SKIN & 180% SIZE - 0.24mm layer, 2 walls, 5% infill
2.1 h
1 plate
Open in Bambu Studio
Boost
85
155
16
15
193
94
Released
Description
Tips for printing:
- Supports: No
- Layer height: 0.16mm (optimal)
- Wall loops: 3
- Infill: 15%
- Seam position: back
- Wall generator: -
- Detect thin walls: -
- Brim: No
Colors and filament I used (4 Color Version):
- PLA / Brown - for the body
- PLA / Black - for the eyes
- PLA / White - for the eyes
- PLA / Yellow - for the feet and beak
Or decide for yourself which colors and how many you want to use!
When you decide to print my multicolor Pre-Sliced (3mf file) for BambuLab I would recommend printing several models at once, not just one, to reduce waste!
If you liked my model you can support me here:
or here for commercial use of my models on Patreon:
Thank you!
Boost Me (for free)
If you enjoyed this model, please consider boosting it to support me to further develop creative and more cute looking designs🥰. Thank you!
Happy printing!
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
Comment & Rating (16)