Munbyn Label Printer Stand by That_3DPrinter_Guy

That_3DPrinter_Guy

Household>Office

Print Profile(4)

All

X1 Carbon

P1S

P1P

X1E

Wider Base and Stand

Designer

14.2 h

3 plates

4.4(7)

0.16mm layer, 3 walls, 15% infill

Designer

12.9 h

3 plates

4.2(6)

0.16mm layer, 3 walls, 15% infill

Designer

14 h

3 plates

0.2mm layer, 3 walls, 10% infill

13.5 h

4 plates

Open in Bambu Studio

Boost

110

224

139

Released

Description

Hey guys, we ordered some of these Munbyn printers at work and needed a way to feed the spool. We didn't want to give up too much space on our desks though. So I designed this stand that feeds from below! There is also a fun little side basket for pens and such, although it is not needed. If you'd like to see a video of how to put it together, check my IG below.

Hopefully this saves someone some money and if you were able to look like a rockstar at work, even better!

Comment & Rating (39)

@WeBe3Dprinting

Boosted

Print Profile

Wider Base and Stand

The profile prints perfectly but the stands don't fit full spools. Could you please make it a little taller so that there is room for a full spool underneath? The spools I buy are about 11.5 cm in diameter. Otherwise, awesome design, and perfect profile.

@bryantrich

Boosted

A 4x6 shipping label doesn't fit between the roll supports. It needs to be 5mm wider between the legs and the roller longer as well.

The designer has replied

@Kajilli

I just uploaded a larger base print profile that is 20mm wider. That should work!

@Kajilli

I just checked the new profile but it extended the base plate instead of the whole model. I'll keep working on it for you!

@Kajilli

Done. Should be 110mm between the legs now!

@TheWrongGuy

Print Profile

0.16mm layer, 3 walls, 15% infill

Found this in a Facebook group! Prints easy and with my 5 printers took no time to print! I absolutely love the stand. I have printed others that dont work near as good! Thanks for the great model

The designer has replied

@Kajilli

Awesome! Im happy it worked out for you! :)

@TheWrongGuy

Replying to @Kajilli :

The only issue I would say is some lable rolls are too big for the roller, they wont fit under the stand without hitting the bottom or top of the stand. other than tha it is great!

@Kajilli

Replying to @TheWrongGuy :

Good to know. I see someone else added a print profile adding a bigger base for that same reason. I can quickly change the dimensions for you. Currently I made it 100mm from base to bottom side of the top deck. How much bigger do you need it? Another 50mm?

@shanehoggatt

Print Profile

Wider Base and Stand

prints and works great , would have been better if it was taller for larger rolls, but that's a me issue not the print , :)

The designer has replied

@Kajilli

Good point! I saw someone remixed my model to accommodate the larger rolls! I truthfully thought the rolls I use were the biggest you could get, so I tried to make the dimensions tight to that one for space savings. Whoops!

@shanehoggatt

Replying to @Kajilli :

not your fault, so many different brands and sizes available :)

@healthitude

Print Profile

0.16mm layer, 3 walls, 15% infill

everything fit together well. works as it should.

The designer has replied

@Kajilli

Glad to hear! Thanks for the rating!

@Ryuzaki

this is awesome! my girl just asked me for this after seeing both your reddit post and youtube short!

The designer has replied

@Kajilli

Awesome! I hope it works for you guys!

@Psych

Dimensions?

The designer has replied

@Kajilli

200mm x 100mm

@Kajilli

But I just uploaded a 220 x 115 size!

@houmark

Boosted

Thanks for making a larger version for my printer :)

The designer has replied

@Kajilli

Happy to help!

@houmark

Boosted

I'd love to print this but my label printer (iDPRT brand) is 220mm x 115mm. Any chance you'd make an upsized top plate? I think all the rest (including hole layout) could stay the same.

The designer has replied

@Kajilli

Done! I just uploaded the print profile.

@danregazzi

Print Profile

Wider Base and Stand

Very cool stand for my label printer. I just switched to the rolled up labels and needed something to hold them. This worked great for that purpose. printed with Sunlu Elite PETG.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.