Bulbasaur lightbox form my “Pokemon Starter Pack” version “The Smalls”

Just hit print! ;)

------------------------------------------------------------

You will find each file named by color for an easy setting

If you don't use the 3mf file:

• Import them in Bambulab/Orca as single object with multiple parts.
• Assign each color to the same named part ("wall" is usually withe to create a nice bright outline)
• Use a PEI Textured plate for an optimal result
• Print White for last

To achieve a nice result be sure to have settings as follow (if you don't use my profiles)

• first layer flow ratio = 1.05
• wall transitioning threshold angle = 50°
• Infill/wall overlap = 20%
• Avoid crossing walls
• Wall generator Arachne

I've used this 50 cm led strip (warm white) with power switch

https://s.click.aliexpress.com/e/_Dd3PGf9

It fits perfectly the backbox size and you have an ON/OFF switch.

You can put a drop of glue on the inside where the cable comes in to make it more stable.

More models and seller license @ https://www.patreon.com/Valda3DPrinting

Happy Printings!

-D-