Hello Maker,

another Cherry Blossom Bookmark for you ! 

Happy printing ! 

Printing tips
- Do not simplify the model.  

- Dont scale the Z-Axis, otherwise the color layers no longer fit. Apart from the Z-axis, the model can be scaled as desired.

- If a message regarding floating objects appears, this can be ignored. (Standard from a HueForge export)

- The profiles are set to an AMS. Otherwise the filament change must be converted into a pause. (Afterwards manual unloading and loading)

Other colors can also be used, this is entirely up to your creativity. However, there is something to bear in mind.

Filament Guide
The ideal filament PLA and PLA+ (glow also possible if suitable)
Only use PETG if you want to create a glossy effect on one color layer.

PETG, Silk and Matt filaments let very little light through, so you have to test this for each model. These filaments can be used for the final colour change for a finish.

About this image
The image used was created by myself. After creation, pre-processing, post-processing, it was scaled up and processed in HueForge.

Printing Instructions - AMS 
- Just Plug & Play, choose your 3MF and Print !

Printing Instructions - NO AMS - Use manual pause between Layers.

HueForge Printing Instructions

Filaments Used:
PLA Sunlu Black Transmission Distance: 0
PLA Sunlu White Transmission Distance: 7.2
PLA Sunlu Red Transmission Distance: 5.8

This print uses 3 unique filaments

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to White
At layer #15 (1.28mm) swap to Red
At layer #21 (1.76mm) swap to White for the rest.

Would you like more ? Then take a look at the other projects
All my Models
3D Art Collection by Flohsen24

Year of the Snake Design Contest
Year of the Snake Bookmark - Happy New Year 2025