Floppy Wolf - Flexi Articulated Animal (pip) by IXPatch

IXPatch

Toys & Games>Other Toys & Games

Print Profile(5)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

brim ears, 0.2mm layer, 2 walls, 15% infill

Designer

3.8 h

1 plate

4.8(149)

no brim, 0.2mm layer, 2 walls, 15% infill

Designer

3.8 h

1 plate

4.9(22)

A1mini 80%

2.9 h

1 plate

4.5(62)

0.2mm layer, 2 walls, 15% infill

3.8 h

1 plate

5.0(6)

Click to see more

Open in Bambu Studio

Boost

1257

2440

283

265

3.6 k

2.1 k

Released

Description

This is a flexible, articulated wolf 🐺 It prints in place with no supports or assembly required. This was one of my very first flexible designs - and it is still very wiggly and makes for a fun desk companion :)

Since creating my first articulated models, I've learned a lot and continued to refine my designs. So if you enjoy this model, be sure to also check out my new and improved flexi designs (there is even a new wolf with more detail and improved poseability).

---

Filament used: Bambu Lab Silk Silver PLA

---

Timelapse:

Bill of Materials

Bambu Filaments

Silver

A05-D1-1.75-1000-SPL

× 1

Buy Now

Download BOM

Comment & Rating (283)

@Kaskeytx

Used Bambu studio to paint the eyes, nose, inner ear and gave him little paw pads! printed perfectly!

(Edited)

@Avram_0179

what paint do you use for this?

@Kaskeytx

Replying to @Avram_0179 :

I'm sorry I should have elaborated, I used bambu studio to paint it so it was a multicolor print.

@user_2116610807

your wolf is so cute

@Sprogz

Bambu Studio shows a warning for both Designer Print Profiles; "It seems object floppy_wolf_v2.stl has floating cantilever. Please re-orient the object or enable support generation." Because the profile already has lots of thought through adjustments I wondered why supports aren't turned on in the profile also, so this warning doesn't show? Should I simply switch on supports so the warning goes away?

(Edited)

The designer has replied

@Shiler3dprints

floating cantilever is from inside the joints. no supports needed and the warning can be ignored.

@IXPatch

As mentioned in another comment, the warning can be ignored. The model is designed to print without supports. You can see a timelapse of the print here: https://youtu.be/RO4AJJjg44k?si=Ssagmp6n50ofwbcd

@VoxelWorks

Replying to @Shiler3dprints :

You’re absolutely right! For most print-in-place models, you can usually ignore that message. Personally, I like to add just a little bit of manual support in the joints to prevent any bridge sagging. It’s not strictly necessary, but I find it helps make the finished piece look a bit more polished and clean—and the supports are usually super easy to remove!

@CCmakes

He printed very well and once I painted him, he looked Even better! The only thing I don’t like is that the front elbow joints don’t bend very far. But otherwise a really good print.

@922collectables

Print Profile

no brim, 0.2mm layer, 2 walls, 15% infill

Kids love it. great print!!!

@horsetiger

Good!

@petipro88

Print Profile

brim ears, 0.2mm layer, 2 walls, 15% infill

Printed in black PETG and it looks amazing!

@user_1222419455

Print Profile

brim ears, 0.2mm layer, 2 walls, 15% infill

The overall movement is smooth, improved posture maintenance would be beneficial

Show original

@udrek

Boosted

Print Profile

brim ears, 0.2mm layer, 2 walls, 15% infill

printed awesome at 70%!

@lion7718

Boosted

Printed on SV06 ACE

@Trackster17

Print Profile

brim ears, 0.2mm layer, 2 walls, 15% infill

Printed great. Moves smoothly!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.