Bird feeder (fat ball) by Danko

Danko

Household>Garden

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 3 walls, 15% infill

Designer

4.7 h

1 plate

3.8(11)

Open in Bambu Studio

Boost

112

Released

Description

Bird feeder for fat balls. Printed these in PLA+ but think you should at least use PETG for best durability and longevity. Opened by unscrewing the lid. The threads are a little tight at first but get better with time. There are drainage holes in the bottom.

the printer profile worked for me. The threads got a little rough but worked.

Dimensions: 245x70x70

Boost Me (for free)

If you like the model, please give a thumbs up or boost.

Comment & Rating (21)

@newmachine

Print Profile

0.2mm layer, 3 walls, 15% infill

Functional and modern design but there is an excess of supports and it is difficult to turn the closure

The designer has replied

@Kopka

Thanks for your input. I'll try to make a model with slightly larger threads and a looser fit.

@Kopka

Version 2 is uploaded. Better treads and slightly change in support.

@user_3658852128

Print Profile

0.2mm layer, 3 walls, 15% infill

the thread locks to a degree where I could well doubt how long it will last

The designer has replied

@Kopka

thanks for your suggestions. I'm going to change the threads so they are a little bigger and looser. I'm pretty new to the 3d world but trying to get better.

@user_3658852128

Replying to @Kopka :

I went through a lot to find a design I liked and I was happy with how the design turned out. So cool that you're working on it. I look forward to following what else you are design.

@Kopka

Replying to @user_3658852128 :

I just uploaded a new version of the model. The threads are improved and the support slightly changed. Hopefully it should print better now.

@user_2088466905

Everything printed wonderfully except for the thread, which came loose on the first screwing in What could be the reason It looked as if it were too small

The designer has replied

Show original

@Kopka

How strange. When I printed it with my print profile, the threads work perfectly. Did you use my profile and with bamboo filament? Did you still have the support?

@LastNightHoe

Print Profile

0.2mm layer, 3 walls, 15% infill

The upper bridge will not print as cleanly

The designer has replied

Show original

@Kopka

Sorry to hear that. I just uploaded a new version of the model. The threads are improved and the support slightly changed. Hopefully it should print better now.

@user_3296554969

Print Profile

0.2mm layer, 3 walls, 15% infill

First try with PLA works!

The designer has replied

@Kopka

Thanks for the rating!

@user_2858185109

Print Profile

0.2mm layer, 3 walls, 15% infill

The thread is too tight for me and the upper bridge didn't print cleanly

Show original

@revoxz

Print Profile

0.2mm layer, 3 walls, 15% infill

good Print. the thread Could be better

@user_2973401194

Print Profile

0.2mm layer, 3 walls, 15% infill

Other Issues:screw too tight

The designer has replied

@Kopka

Thanks for your input. I'll try to make a model with slightly larger threads and a looser fit.

@user_1275933160

Print Profile

0.2mm layer, 3 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

122

Print Profile(1)

Description

Comment & Rating (21)

License

Related Models

Fat Ball Feeder

bird feeder

Bird feeder

Fluffy Birds Perch Set