fun Santa Hueforge project I made for my son using AI to generate the picture on which I based the model.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.52mm
The Max Depth is 2.3mm and the Actual Depth is 2.4mm
Filaments Used:
PLA+ eSun Black - Transmission Distance: 0.3
PLA MatteBambuLab Scarlet Red - Transmission Distance: 4
PLA Anycubic Peachy Fuzz - Transmission Distance: 5
PLA Matte BambuLab White - Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.68mm) swap to Scarlet Red
At layer #15 (1.32mm) swap to Peachy Fuzz
At layer #21 (1.8mm) swap to White for the rest.
If you resize make sure not to change the Z-value!
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)