mickey mouse by lucamoretti86

lucamoretti86

Household>Decor

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.16mm layer, 2 walls, 15% infill

Designer

3.3 h

1 plate

4.8(80)

scaled down, no tail, 0.28mm layer, 5 walls, 15% infill

34 min

1 plate

4.5(15)

Open in Bambu Studio

Boost

931

1559

133

111

2 k

851

Released

Comment & Rating (133)

@emimayoral

Print Profile

0.16mm layer, 2 walls, 15% infill

Brilliant! I wish there were a color AMS version

Show original

@Youngbru

Boosted

I have painted the model for AMS use, but unfortunately, I haven't yet received my AMS, so I cannot print it yet and cannot upload a print profile. It is my first attempt at painting a model for multi-color printing in Studio and after slicing it, it says that will take 479g of filament, only 51.5g are in the actual model! Don't know if this is typical or just something with this model or how I painted it. If you want to send me a message, I would be willing to share my .3mf file if you promise to let me know how it prints and send me a picture.

@Youngbru

Boosted

I just uploaded a 5 color AMS version. Used my AMS-Lite and changed one spool mid-print to get the 5 colors.

@mout

Print Profile

0.16mm layer, 2 walls, 15% infill

Lovely little Mickey, not easy to remove the supports, the tail broke unfortunately, printed in dual-color PLA Silk, some imperfections due to the supports, I will reprint it in PLA Basic to see if there is a difference, thank you for this project 👍

Show original

@ludovicvasseur3

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Excellent, very well done

Show original

@user_49004082

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Top, I was looking for a figure for the Benchy printed it at 230%, perfectly suited Many thanks for the file

Show original

@user_2773068294

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

The parameters are superb The tail holds very well

Show original

@user_2703708700

Used Creality pla+, came out so clean. Not keen on the huge supports, the tail broke off as I was removing them. Other than that, I love the print 🙂

The designer has replied

@lucamoretti86

leave 5 stars if you liked my work!

@Husky3DPrints

Print Profile

0.16mm layer, 2 walls, 15% infill

beutifull fast print

@captainallergy

Print Profile

0.16mm layer, 2 walls, 15% infill

Looks cute but unfortunately the tail is super fragile. During the print it did not hold and broke already. Still a cute looking print even without the tail.

@awkwardarcher

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

looks absolutely awesome! Will have to be careful with the supports under the tail

@user_195080757

Print Profile

0.16mm layer, 2 walls, 15% infill

The print process was entirely problem-free. Even the supports were carefully removed without breaking the tail. However, one must proceed with utmost caution. Otherwise, a stunning print. Printed with PLA Silk

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(2)

Description

Comment & Rating (133)

License

Related Models

Mickey Mouse

Wireless Mouse Kit 002 Enhanced Button Grip

Mickey Mouse Rubber Duck

Minnie Mouse Bow