Printed a ton of these out of Bambu PETG HF. Did four per build plate. Mounted them to a piece of 1/2" plywood, which I then mounted to my finishing cabinet. This is helping me free up space inside the cabinet to store the HVLP unit. There are some cans that don't fit - it depends if the bottom of the can has the seam rolled towards the outside of the can or to the inside. I don't have good enough skills to make a mod of this. I don't want to just scale it up because I don't want the hex base to scale as well. Can someone make a mod that fits cans with the bottom seam rolled towards the outside?

Works as intended

neat sturdy design with very snug fit to a variety of paint and lubricant cans.

printed perfectly in my X1C and my P1S with generic PLA from Fremover.net here in Miami. I added 3 to the plate because we need 10 total. printed the 4 with no issues on either printer.

Amazing print. No issues.

had to resized slightly to fit all spray cans but decent print

THANK YOU for this print. This turned out perfectly! The cans fit snug, not tight. The sides printed on an angle so you can mount them vertically on the wall. perfect for a tiny room. They printed smoothly and look sharp. 2 screw holes inside for mounting. Nice!

I got 4 on one plate. they take a while to print, but I will be printing a bunch more since these will work great for one are I need them