Love to hear it! Super glad your son could use it! 😁

im.jackharvest

this was a lifesaver. the charger doesn't stick well and my 7 year old son had a lot of trouble with it. this stand makes it so much easier to plug in and have a designated place to keep his watch!

user_2777414133

needs more walls of infill. felt a lil underweight

risenbylayers

[Default] 0.4 nozzle, PLA, 0.24mm layer, 2 walls, 0% infill

Print will last longer than the watch unfortunately, watch bricked on day 2.  Good print but definitely add some infill, quite brittle for me without it on the first print, seam cracked putting in the cable.  Solid design though.

Die Hard 3D Printing

Really great design. Printed easily, and the charging cable stuck very securely in the stand. Watch charges super easily now just by dropping it on. With just the cable, you really had to fiddle with it to stay on the watch, and you'd frequently come back the next day to find it didn't actually charge.

user_2025576255

Feel free to bump up your infill from 0%. I mostly did this to speed up printing as I experimented with sizing until I got it just right. Hollow works fine, but you might find it necessary to be more... gentle. :D

djseto

user_655601502

bxxth

ShakeableTuna

cover

2024-12-04_19-44-16.JPG

2024-12-04_19-34-45.JPG

2024-12-04_19-35-23.JPG

0.4 Nozzle, PLA

plate_1.png

[Default] 0.4 nozzle, 0.24mm layer, 2 walls, 0% infill [PLA]&nbsp;This one will be easier to print from your Bambu Handy app due to more conventional nozzle size and material type.

2024-12-04_8bff3370cd1ba8.jpg

Change to whatever you'd like - tree supports are enabled and are EASY to remove. There's a brim. My 0.6 nozzle profile used PETG. (This one). The other one uses PLA (0.4 nozzle).

0.6mm nozzle, PETG, 0.24mm layer, 2 walls, 0% infill

Reckit

Apple Watch Charging Stand

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Lets make more cool stuff!</boostcontent></boostme>Ok, I looked. There wasn&#39;t one. Needed to rectify asap. So, this is modeled after the beautiful <a target="_blank" href="https://makerworld.com/en/models/104114" rel="nofollow noopener">Apple Watch Charger</a> made by <a target="_blank" href="https://makerworld.com/en/@Reckit" rel="nofollow noopener">Reckit</a>.&nbsp;Hopefully the pictures make it perfectly clear; You print this (I used tree supports, but, if your bridging is king you might get away without - I didn&#39;t dare), and then you squeeze that charger into place. The fit is nice and snug but not “how the crap do I put this in” snug.&nbsp;The cable Cosmo gives you for the JrTrack watches is embarrassingly short, and you&#39;ll find about 12 inches or so available after routing the cable through the cable trough. A usb “A” extension cable is recommended unless your lamp has a USB port on your nightstand or something.&nbsp;I printed mine with 0% infill. After consideration, I made the 3MF profile that way. It really doesn&#39;t need anything on the inside. You&#39;ll likely need to change your nozzle from 0.6 to whatever yours is when you open the file since that&#39;s what I was using. &nbsp;Good luck! Hopefully this helps someone!

Print Profile(2)

Description

Comment & Rating (10)

This remix is based on

License

Related Models

SusDock – Apple Watch Charger Stand

Stand for iPhone and Apple Watch Charger

Watch stand single | Honeycomb

Roflex Watch

Cosmo JrTrack Watch Stand Charger