Diamond Painting Ship L… now with inserts for magnets… for when the magnetic garages arrive later

The lower bridge height allows for easier pickup of the stones with tweezers

Please read

here the matching ship for the 30s or other of my garages - L garages to follow

Ship size 12*7 cm

The ships consist of several print files, so that the bottom, bridges and hull can be printed in different colors

Insert and connect the bottom, bridges and hull simultaneously

here you can see how the ship is assembled:
https://mega.nz/file/gZwTTaBY#t284mr3rXQYCTORC0ctU4w59o3VYU6jV4FKe4cA5vpM

Plugs with tapering 0.2; 0.3; 0.4… included
I print 99% of the plugs with 0.4, but there is filament where the plug may be too tight or loose and you need a different one

Update: The update includes a multi-story car park where excess stones can be stored. As with the other ship, add all three parts to the slicer simultaneously and press yes

Plugs and lids are available separately as STL downloads

3D Printing Settings

Insert and connect the bottom, bridges and hull simultaneously
Colors can be selected separately in Bambu Slicer

Best results with layer height 0.16
Outer wall speed 60 - 200mm/s
Inner wall and infill max. 150 - 270mm/s

Infill 10-15%