Miyoo Mini Plus Thin Case by fishbones🐠🐟MakerWorld: Download Free 3D Models

fishbones🐠🐟

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

0.2mm layer, 2 walls, 15% infill

Designer

1.8 h

1 plate

5.0(4)

Higher tolerance 2mm hinge hole

Designer

1.8 h

1 plate

Open in Bambu Studio

Boost

Released

Description

A thin Miyoo Mini Plus case that protects your console without adding bulk!

Print without supports, no extra hardware needed!

Modify to your liking with the provided step file!

Assembly is easy!

Put together the 2 parts.
Insert a 1.75mm filament to the hinge holes. You may push the filament just as the outer and inner part of the hinge connect and not all the way through as the tolerances can be tight due to printing without supports.
If you find inserting a filament troublesome, you may first loosen the holes with an allen wrench or screwdriver but be careful with the rear part! It may break with the layer line as it's printed upside.

Comment & Rating (12)

@brokean

Boosted

I like it. just two small things. the abxy button holes could be moved to the right by a millimeter or two and the usbc cut out could be moved down by a few millimeters.

The designer has replied

@fishbones

Thanks for the feedback! Looking at mine, indeed it's a bit off. I have adjusted the model to correct this. Awesome print too!

@brokean

Boosted

Replying to @fishbones :

awesome. thank you for the quick fix

@VilaineCrochet

Print Profile

0.2mm layer, 2 walls, 15% infill

printed great, fits great, it’s perfect

@epajet

Print Profile

0.2mm layer, 2 walls, 15% infill

Very thin but sturdy. Nice design. Needed to print bottom section separately and with a 10mm brim. 2 first attempts kept falling over minutes from the end of the print :(

@brokean

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

prints great. love it.

@brokean

Boosted

I feel like this makes no sense but I also like it for some reason lol.

The designer has replied

@fishbones

Well you know, sometimes something that doesn't make sense brings us the most joy.

@LinkMakesPrints

Boosted

it’s a great print but I have one issue. I’ve been having to loosen the hinges to get it to work and I was wondering if you could make a version with less tight tolerances just if I need to make another one because I’m not loosening them again. thanks!

The designer has replied

@fishbones

Sure thing! Thanks for the feedback and boost. Update: uploaded a new print profile with higher tolerance model.

(Edited)

@TimJongUn

Beautifull design! I only have 2 issues with the print. The first one: i cant get the bottem section to print right, is turns in to spaghetti because it falls over (normally i have pretty good bedadhesion) And the second part is that i can't get the 1,75mm filament into the hinge holes.. Even not with the 2mm tolerance. I'ts just impossible to do.. Any suggestions?