Bambu Lab A1 / A1 mini Hotend LED Decoration by mr_mkaay

mr_mkaay

Household>Decor

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

6.2 h

3 plates

5.0(28)

Open in Bambu Studio

Boost

254

378

281

109

Released

Description

Hotend decorative model for Bambu Lab A1 / A1 mini

This 3D model is a faithful replica of a hotend from the Bambu Lab printer series (A1 / A1 mini). It is specifically designed for versatile use: as a wall decoration or a freestanding highlight on a shelf or desk.

Special features:

Realistic replica: Based on the design of a real Bambu Lab hotend, perfect for technology fans and 3D printing enthusiasts.
Integrated LED function: The nozzle has a hole for inserting an LED light strip or tube. This creates the impression that the hotend is printing filament – a real eye-catcher!
Flexible wall mounting: The model can be either glued or screwed on. Screws can be conveniently hooked between the cooling fins.
Easy adjustment: In the slicer, the model can be easily scaled to the desired size to fit any room situation.

Printing recommendation:

Material: PLA, PETG or other standard filaments.
Support: Theoretically not required. However, I printed it with support to be on the safe side.
Infill: 15% is sufficient.

Boost Me (for free)

Thank you for your support

Tip: When scaling the model in the slicer, the cross-section of the LED tube should serve as a reference. Use the measuring tool in the slicer to check if the hole in the nozzle is large enough for the tube to fit. If the cross-section does not fit, simply scale the model larger/smaller until it fits.

Enjoy!

Check out my other Hotend for X1C, P1S, P1P series:

https://makerworld.com/en/models/839714#profileId-786168

Bill of Materials

Maker’s Supply Kits and Parts

WS2812B RGB LED Strip Light (1pcs) - KA001

$22.99 USD

B-KA001

× 1

Bambu Filaments

Jade White

A00-W1-1.75-1000-SPLFREE

× 1

Silver

A00-D1-1.75-1000-SPLFREE

× 1

Black

A00-K0-1.75-1000-SPLFREE

× 1

Buy Now

Download BOM

Comment & Rating (56)

@Raveman

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

I like it. I can’t upload video here. The light is moving from top to bottom. There is also created automation, when printer is on, the LED turns on and off when printer is off too. Greate model. Printed very well.

@Art3DMaker

Are these RGB LED ICs

Show original

@Raveman

Boosted

Replying to @Art3DMaker :

This is Twinkly Flex RGB

@Art3DMaker

Replying to @Raveman :

😳😳 The prices 🤣 are you kidding? 🤣 They're far too expensive 😳😳 Aliexpress sells the same ones 😳

Show original

@mematitr

I scaled it to 2300, as my LED tube was somewhat thicker, and I glued five plates to the back as spacers to the wall so that the tube lies flush

(Edited)

Show original

@CptDiabetes26

I’m just curious….how much filament did you use? I wanna make a massive one as well

@mematitr

Replying to @CptDiabetes26 :

infill 8% not much filament

@mematitr

Replying to @CptDiabetes26 :

approx 400 gr

@user_783188517

Print Profile

0.2mm layer, 2 walls, 15% infill

This thing is awesome! Printed at 2100% and I'll be working to mount it later this week along with my LED strip. Improvements I'd recommend: 1. A joint to help the two large pieces stay together without glue or to help the glue. 2. Add a couple mounting holes on the back to aid in mounting to the wall for larger size prints. 3. The print profile for the magnet has a sparse infill density of 10% and a lightning sparse infill pattern which causes the magnet to print without infill on my A1.

@uFo71

Boosted

Like you said! It`s a very nice model, but improvements are needed like: stronger and better way to join the two pieces together, Some kind of mounting holes, and yes my Mini also printed the magnet without infill...

@TurboTime32

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Awesome model and great profile! Scaled it up from 1400% to 2000% and added a cutout on nozzle to help fit my Amazon LED Strip and I love the way it looks now

@Dave401

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Prob my most fav print so far!!!. I scaled the print up so the black part ALMOST fills the A1

The designer has replied

@mr_mkaay

I am very pleased to see this 👍🔥 Excellent work

Show original

@madmaxedm

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Looks awesome! Used a govee N1 rope light had to modify the nozzle a bit but turned out good.

@Christian90

Where can I find the matching LED strip?

The designer has replied

Show original

@mr_mkaay

You can find the tube on Amazon, it's by Govee

Show original

@Christian90

Replying to @mr_mkaay :

Thank you

Show original

@Christian90

Replying to @mr_mkaay :

Is that the one for 99 Euros

Show original

@Dave401

Boosted

Damn...I literally just printed the other hotend u have and i dont even have an x1..i was just so happy to have a bambu hotend on the wall !! Now i see the A1 hotend now i have to print this ASAP.

(Edited)

@user_2287544690

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Mega 😎

@Ebbhead242

Boosted

Sehr schönes Modell.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Bambu Lab Bed Scraper V2

Libang

226

Mini desktop trashcan

Axl in layers

202

231

A1 MINI AXIS X,Y,Z TOOL 3 IN1

TEXAS_GUY(REAL)

147

174

Valentine day love decoration

Marlborke