iPhone MagSafe charger stand with a modernized G4 iMac-inspired design,
Every part is fully 3D printable.

Firstly, check if you have the OLD or the NEW 2024 MagSafe Charger.
If you don't know which one do you have, then check out the last picture.
Pick the correct model for your MageSafe Charger! :)

This is an iPhone MagSafe stand inspired by the design of the iconic G4 iMac.
It is compatible with all MagSafe iPhone models. 

Assembly Instructions:

1. Print the Parts:
   Print the following parts: Base, ChargerHolder, and Plug. Remove any support material from the Base.
2. Add Weight (Optional):
   Fill the Base with material through the bottom hole to add weight, if desired.
   (I used rice, but you can use any solid material)
3. Secure the Plug (Optional):
   Screw the Plug into the bottom hole to seal it.
4. Attach the  ChargerHolder:
   Glue the ChargerHolder to the Base securely.
5. Insert the MagSafe Charger:
   Place the MagSafe Charger into the ChargerHolder and use the cable management. 
6. Enjoy:
   Your setup is now complete! Enjoy using it and boost me if you like your new phone stand :)

I launched a Patreon for anyone who wants to support my work or use my prints for commercial purposes.
https://www.patreon.com/EBengineering

If you like the model, consider supporting me with a boost!
 
Versions
V2.0:
 - works with every iPhone model (iPhone, Pro, ProMax, Max, Mini)
 - Poka-yoke design for easier assembly
 - updated cable management (safer for the cable)
 - weight option (you can make it heavier by filling it up with solid material)

V1.0:
 - works with every iPhone model  (iPhone, Pro, ProMax, Max, Mini)
 

V0.9:
 - Only works with ‘regular iPhones’
 - doesn't work with the Pro models