Big bricks *The Nutcracker* by Warp3D Prints

Warp3D Prints

Miniatures>Other Miniatures

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

Big Brick *The Nutcracker* NO AMS NEEDED!

Designer

15.7 h

6 plates

4.8(20)

BRIMMED and A1 mini compatible, 3 walls, 15% gyroid, 0.2mm

15.8 h

8 plates

Open in Bambu Studio

Boost

160

329

200

Released

Description

Big Bricks *The Nutcracker*

This beauty is ready to print with no AMS needed!!!

The 3MF is optimized for minimal supports.

He stands approximaly 11 inches tall with that big ol'e hat!

This Nutcracker was a labor of love. Tolerances are a little more fine-tuned and you will notice there are tabs with the inserts to ensure a nice snug fit.

Shoulder pad is split in half to minimize supports and will need to be glued together.

The head and hair should be aligned, and the head should just slide back into the hair.

There is a little flex, so don't worry, it shouldn't snap. I've tested multiple times thru out the day to make sure.

Between the Hat and hair there are tabs that secure them together.

Legs simply slide together and hold well, but you can use glue for a permanent secure bond.

Sword is put together and insert is pushed thru to hold it together, no glue needed.

I hope you enjoy this as much as I did!

Happy printing!!!!

**UPDATE**

It was brought to my attention on the original 3MF that the golden shoulder pads top and bottom pieces had 2 different scale sizes. Not sure how that happened, but I have fixed this now. The 3MF has been updated! Sorry about that!

Boost Me (for free)

Thank you everyone for supporting me and all the boost!! Thanks to you all, I will continue to make many more big bricks, hopefully some you've never seen before.

Comment & Rating (49)

@sophie.burgunte

Print Profile

Big Brick *The Nutcracker* NO AMS NEEDED!

Beautiful model, printed without problems ! I had a lot of sanding to do on the face pieces to make them fit, maybe add a multicolor profile for those who would prefere a little more time of printing. The head doesn't hold, and I have 2 very little black pieces left and I have no idea where they're supposed to be 😅 I'm happy to see how it turned out however, as except the face everything fits easily.

The designer has replied

@joeymatos

I noticed last night when someone else commented about the 2 left over black pieces that I had accidentally imported the old pegs for the hat to hair. Thanks for reminding me! I'll take those out of the 3mf!

@sophie.burgunte

Replying to @joeymatos :

Thanks for your answer ;-)

@Jamesnk111

Boosted

Print Profile

Big Brick *The Nutcracker* NO AMS NEEDED!

Had to slow the print speed down and add brim to several of the smaller pieces but overall great print and great addition to my nutcracker collection!

The designer has replied

@joeymatos

Thank you for taking the time to rate and post a picture! Yeah, I sometimes forgot the need for brims when creating the 3mf. I've gotten used to my cryoplates lol

@nontruthlove

Boosted

I printed it at 200% magnification, and it was perfect, but I'm unsure how to scale the long, rectangular piece in the middle of the knife; several attempts have failed. I also don't know where to attach the two small, black rectangles

(Edited)

The designer has replied

Show original

@joeymatos

The 2 black rectangles were extra inserts but a little smaller to keep the hat connected to the hair. I didn't think about how that sword insert would scale. Normally I would scale it to the same upscale for everything else.

(Edited)

@nontruthlove

Boosted

Replying to @joeymatos :

All right, thank you. I printed an assembled set of parts for a sword, scaled up according to your proportions, unfortunately it’s completely wrong. I’ll investigate further. Thank you

Show original

@user_2859890343

Boosted

Great Model! came out really nice! thanks!

The designer has replied

@joeymatos

That looks great!!

@KateEarn3

Boosted

LOVE this model!

The designer has replied

@joeymatos

That looks so awesome!!

@user_1709865368

Boosted

done at 200% love it

The designer has replied

@joeymatos

That looks amazing! Thank you for sharing!!

@user_19801974

Boosted

Making a 2nd one with a blue coat because we don't like the red-coats. lol Great print! The spaces where the gold went on the boots and chest had some drooping problems abd needed to be trimmed with a knife. The leg attachment to the hips needed some trimming as well. the head is too loose. The sword fits together beautifully. Over all it's a great print. Thanks for your hard work putting these out! It's really appreciated!

(Edited)

@tileet1981

Boosted

love it all

The designer has replied

@joeymatos

Thank you for the kind words!

@zenoNL

Thanks for this model! it is absolutely amazing! :) I did have to tweak the profile with brims, and decided to print on a1 mini so added a profile for that :)

The designer has replied

@joeymatos

Awesome, Thank you.

@aprodigy2000

Boosted

excellent model!

The designer has replied

@joeymatos

Thank you!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(2)

Description

Comment & Rating (49)

License

Related Models

BIG BRICK NAVY SAILOR

Big Brick Cheerleading Pom Pom

Big Brick * Indiana Jones * 500%

BIG BRICK SIX SHOOTER