Saurons Helmet | Lord of the Rings by Exo

Exo

Props & Cosplays>Masks & Helmets

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 10% infill

Designer

10.4 h

1 plate

4.8(28)

Open in Bambu Studio

Boost

476

1061

517

210

Released

Description

Lord of the Rings | Saurons Helmet

i found the model on thingiverse, made it printable, scaled it up and printed it for a friend of mine. Sharing the print profile so you can print your own!

Comment & Rating (86)

@Spoonsmcgee

Boosted

printed pretty well. getting supports right to get all of the small edges on the bottom was tough. designed a stand to go with it.

(Edited)

The designer has replied

@Exoo

nice! looks good

@Asad1087

Replying to @Spoonsmcgee :

That’s amazing!

@godzilla1231

that stand is awesome! any way you could upload that to print here as well?!

@pyroghostx

Boosted

Very awesome looking print, but really bummed that it won't stand up on its own. So it's not a good display, now I need to figure out how to get it to stay up sitting on my desk

The designer has replied

@Exoo

i can try my best and model some sort of a stand for it if you want. a friend of mine put it on top of a light bulb and is happy with it because he uses it as a lamp

@pyroghostx

Boosted

Replying to @Exoo :

Yeah that would be awesome if you could

@christian.nordb

Replying to @Exoo :

If you make one could you tag/respond to me aswell cause I would love to gave a stand aswell

@user_4293768274

Boosted

The helmet orinted out perfectly and I integrated it into the severed finger with ring. I think it turned out pretty cool.

The designer has replied

@Exoo

looks insane! thanks for printing :)

@Spoonsmcgee

Boosted

That is awesome man, thanks for sharing.

@bigrplays

Boosted

Print Profile

0.2mm layer, 2 walls, 10% infill

Sick print! 🔥 Just needs a stand with it!

The designer has replied

@Exoo

i will be working on a stand for the helmet :) thanks for printing it!

@bigrplays

Boosted

Replying to @Exoo :

You're a good man! Keep up the good work 😘

@user_1834024249

Print Profile

0.2mm layer, 2 walls, 10% infill

Superb, especially the facets that reflect light differently as it rotates

The designer has replied

Show original

@Exoo

looks good! thanks for printing it :)

@pyroghostx

Boosted

Print Profile

0.2mm layer, 2 walls, 10% infill

Legit

The designer has replied

@Exoo

very nice!

@GSLock

Boosted

Print Profile

0.2mm layer, 2 walls, 10% infill

It turned out very well Thank you 😄

The designer has replied

Show original

@Exoo

thanks for printing it! :)

@inca_kola

Print Profile

0.2mm layer, 2 walls, 10% infill

The listing said 10.5 hrs but it was 37 hours to print and I'm not sure why. It might be due to the supports we chose? This was my son's first time printing without my assistance so I'm not sure. Either way, it printed nicely but the supports were really difficult to remove and left a lot of rough edges. We used PLA basic in black and it looks really nice.

The designer has replied

@Exoo

you might want to check your printer settings. the bambu studio slicer tells you every parameter which has been changed, your son might have messed around with the print speed, layer walls, infill, PLA specific settings or something else. i would suggest to reset the settings and then import the profile by clicking on "open in bambu studio". this way the profile gets loaded into your slicer :)