other than early alignment issue it's good

S2machines

0.16mm layer, 2 walls, 12% infill

which profile did you use? I did not have the same results? did you use adhesive? 

Vault3dDesignz

Designer profile was used; smooth PEI plate, no glue, but I'll give it a try. Thank you.

yeah even in my comments I suggest using glue. the detail will always pull on the first layer. it’s meant to be a quick print but have only seen issues when people didn’t use glue. 

Marco3DF

did you have any issues printing them? did you use adhesive like suggested? 

i did not use any glue, and i didn't have any issue except for some minor stringing in the first layer

I’m remaking a new design. I’ll post it up later today. saw yours turned out good so wanted some feed back. thank you for responding! 

Junior

Thanks! make sure you try the new file I uploaded just a few hours ago.  

user_795837749

I’m getting some complaints on the print. yours were successful. what did you use for it? seems most are not following the glue method I’ve suggested. 

I only cleaned the plate before print with tehnical alcohol, flow calibration and bed leveling activated.

user_2461418161

asplemmons07

LetsSeeWhatWeGet

Bundy99

Guto

user_1603367455

cover

462569762_1286617322595816_6923443747043908744_n.jpg

462576001_1147458403608273_5321410978978053497_n.jpg

2024-12-03_c7d5c059566f2.jpg

plate_1.png

I always recommend using some sort of adhesive or an amazing plate. &nbsp;This test printed perfect for us, so please don't leave feedback that it didn't stick to the plate. &nbsp;:)&nbsp;&nbsp;

IMG_6084.JPEG

Weisnetde

only 1 wall on first layer for a cleaner surface,100% infill for a solid print,adjusted profile

[Easy+Clean] 4 Santas, 0.2mm layer, 2 walls, 100% infill

IMG_5137.jpeg

lukasnms_

Each side is colored.The design here is colored on both sides. So it doesn't matter how it turns on the Christmas tree.&nbsp; &nbsp;

colored on both sides 0.16mm layer, 2 walls, 12% infill

2.png

Santa Bu!!

ptysiek

On the first layer, the line width is 0.32 for high-quality small objects.&nbsp;Print Face Down on a Textured PEI Plate for best results&nbsp; &nbsp;You can change the colour / size with ease&nbsp; &nbsp; Double-sided design with a full colorSanta has been designed to minimize color changes, color changes are on the first three and last three layers.&nbsp; &nbsp; &nbsp;Please visit my profile page for my own designs and other print profiles.&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;&nbsp;<a target="_blank" rel="noopener noreferrer" href="https://makerworld.com/en/@ptysiek">https://makerworld.com/en/@ptysiek</a>

0.2mm layer, 3 walls, 20% infill Double-sided color REMIX

IMG_4858.JPEG

DefMaker

Babbo 9PZ

12/8 Revised Model! Please download the designer file.  I have some concerns about the design and I took a look at it and although mine didn&#39;t have that issue, I can see where it was an opportunity.  Corrected the gloves on both hands.  &nbsp;I&#39;ll be adding additional ornaments in the next few days but this one was too cute not to post right away. We have a craft fair coming up and made these for my wifes business. Hope you all enjoy and can make some money from them. If you don&#39;t mind leaving me a boost it helps me keep my designs free for all. All my designz at this time are free to use and full commercial use.

Print Profile(5)

Description

Comment & Rating (148)

License

Related Models

Bunny booty earrings

Cute Knitted & Ornamented Velociraptor Dinosaur

Splash of Light

Easter Egg Cup Holder for Decorating & Display

Santa Booty Christmas Ornament