10mm laser honeycomb Standoff clips for 3,4,6mm by 3DShed

3DShed

Tools>Machine Tools

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 3 walls, 20% infill

Designer

2.4 h

1 plate

4.9(14)

7.75mm shank, 2 walls, 15% fill

2 h

1 plate

Open in Bambu Studio

Boost

124

310

234

132

Released

Description

10mm Standoff clips for laser honeycomb for 3,4,6mm material.

The distance is for putting under the material if you want tro prevent itt to fall down but make sure the laser wont hit them.

Raises the material 10mm of the honeycomb.
I printed in eSun pla+ but i beleve most plastic would work.

I have a xTool s1 but i guess it will work with other honeycombs as well as long the hole size are bigger then 9.5mm.

For the original model for 10mm hole in the honeycomb with a more sturdy top of 3mm look under folder “Honeycomb with 10mm hole standard” this is the one i usee for my Xtool S1 honeycombe

I have added a model with a more low profile top for lasers that goes tight against the material, look under folder “Honeycomb with 10mm hole Low profile just 1mm over material” se pictures.

I have added a model for with 7mm honeycomb pin (not tested but let me know if its to wide in the base and i will fix it)
Look under folder “7mm Honeycomb pin” see pictures.

I have added a model for with 6mm honeycomb pin (not tested but let me know if its to wide in the base and i will fix it)
Look under folder “6mm Honeycomb pin” see pictures.

I have added a model for with 4,5mm honeycomb pin (not tested but let me know if its to wide in the base and i will fix it)
Look under folder “4point5 mm Honeycomb pin” see pictures.

Comment & Rating (43)

@Coolshrimp

Print Profile

0.2mm layer, 3 walls, 20% infill

Printed well and look great. But I’ll need to modify them to fit my bed.

The designer has replied

@3DShed

thank you😊 what is the size of the hole in your bed? I have a 7 mm version as well and can modify if I have the measurements 😊

@Pizzaman789

looks like a glowforge crumbtray

@Coolshrimp

Replying to @Pizzaman789 :

I have omtech 80watt I’ll measure when I’m home.

@user_601798501

It looks good and the test print yielded excellent results. However, I only see the 10mm and 7.75mm versions. I need the one for 7mm honeycomb (approximately 6.75mm measured). Where can I find that one in the "folder"? Thank you for your work by the way

The designer has replied

Show original

@3DShed

i can make one for you but have you tried the on that has a 6mm pin? in my experience with my honeycomb bed is that not all holes is perfect and some play in the hole will help to get it to fit. Are you on the phone app? if so you will just see the one thats has a printprofile i think, you can either use your webbrowswer in your phone or a computer to see it then press the download stl/cad files to see the folders.