Victorinox 91mm CarbonFiber V2

Copyright Claim

Victorinox 91mm CarbonFiber V2

Boost
41
85
10

Print Profile(1)

All
A1 mini
A1

0.12mm layer, 2 walls, 100% infill
0.12mm layer, 2 walls, 100% infill
Designer
55 min
1 plate
4.7(3)

Open in Bambu Studio
Boost
41
85
10
8
83
49
Released

Description

These custom-designed 3D printable plates are tailored for the Victorinox (91mm) Swiss Army Knife. it has the same dimensions as the original ones.

 

To Produce CarbonFiber Texture

First, you should have the carbon fiber textured plate to do it, or any other textured plate such as the triangles or the stars one,

Second, select the Smooth PEI Plate profile in slicer

 

Whats New In V2?

  • Improved the fit of the plate eliminating any play
  • Ironing the bottom surface for better contact
  • Added a chamfer to make picking the toothpick easier
  • Higher quality outer walls

 

Installation Instructions:

 

1. Remove the Original Plates:

• Use a small flat-head screwdriver or pry tool to carefully lift the edge of one of the original plates.

• Start at the lanyard hole or a corner where the plate is less tight.

• Slowly work your way around the plate, gently prying it off. Avoid excessive force to prevent damaging the knife.

 

2. Clean the Knife Body:

• Wipe away any residue or adhesive left from the original plates using a damp cloth.

• Ensure the surface is dry and free of debris.

 

3. Attach the 3D-Printed Plates:

• Align the 3D-printed plate with the knife body, ensuring the snap-fit tabs align with the corresponding points on the knife.

• Press the plate firmly into place starting from one end and moving toward the other until you hear a click or feel it snap securely -Don't worry about pressing it too hard it is normal.

 

Your Victorinox 91mm Swiss Army Knife is now customized with your unique plates!

Bill of Materials

Bambu Filaments
A01-B6-1.75-1000-SPLFREE
× 1
Buy Now
Download BOM

Comment & Rating (10)

Please fill in your opinion
(0/5000)

Print Profile
0.12mm layer, 2 walls, 100% infill
really nice.
The designer has replied
1
Reply
Thank you very much!
0
Reply
Boosted
clever design, drop in replacement for OEM part
1
Reply
Boosted
a gem. thanks works perfectly. I wonder how did you even model this? Genius.
The designer has replied
1
Reply
Thank you very much!, could post a picture of yours please
0
Reply
Boosted
like
0
Reply
cool
0
Reply
Print Profile
0.12mm layer, 2 walls, 100% infill
The designer has replied
0
Reply
Thank you for your rating! If you have any issues, please do not hesitate to provide me with your feedback.
0
Reply
Print Profile
0.12mm layer, 2 walls, 100% infill
0
Reply
No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.