Model Description

Do you have credit or debit cards that you may own but rarely use? How about airline and hotel loyalty cards? Grocery cards? Dining rewards cards? Gym memberships? You get the idea…lots of credit-card sized cards that you don't necessarily use often…but you need to be able to get to them on those occasions when you do.

Model Variations

My ‘Designer’ profile has 3 plates with the following variations:

1. Three Full Size slots. Holds around 40 cards. 5x3 grid.
2. Two Full Size slots. Holds around 25 cards. 3x3 grid
3. Three Full Size slots + 1 mini / keychain card slot. Holds around 40 full size and 15 mini cards. 5x3 grid

All variations have magnet holes and are stackable! So if you need to hold more cards - print a few!

The exact number of cards each slot will hold will vary depending on card thickness and may be more or less than quoted above.

Boosters

Thanks for the Boosts! I don't take them for granted and am very humbled and appreciative when I receive them and want to shout out the boosters here for a special thanks. If you boosted me but don’t see your name here, please send me a message so I can acknowledge your generosity.

Markaroons

Printing Notes

If you can, just use the included 3MF file. But for those that can't / don't want to, here are the settings I used and worked well:

0.24mm layer height. 2 perimeters / wall loops. 10% infill using ‘Cross Hatch’ infill pattern (gyroid would also work great). 4 top shell layers.

Non-Gridfinity Option

If you found this page, then it probably means you enjoy Gridfinity! But on the off-chance you like the concept of this credit card holder but aren't into Gridfinity (or if you need an even lower profile version to fit in a tight space), check out my stand-alone (non-gridfinity) model here.