Grinch Stealing Ornament Christmas Earrings by Willis3D

Willis3D

Fashion>Earrings

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

Designer

2.9 h

2 plates

4.3(3)

0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill

Designer

16 min

1 plate

4.0(1)

Open in Bambu Studio

Boost

121

266

Released

Description

This model uses two eye pins on each hand, one on top one on bottom.

An earring hook and jump ring for each to complete.

how the grinch stole christmas

Bill of Materials

List other parts

EarringHook x 2
EyePin x 4
JumpRing x 2

Download BOM

Comment & Rating (14)

@Luxendal

Boosted

Sorry to be blowing up the comments on this lol. I got them printed nicely with a 0.2mm nozzle. The ornament ball looks good, but the white loop part is pretty weak just do to print orientation and the nature of layer lines. This could be fixed by printing the ball laying on its side, or you could just put a hole in the top of the ball for another screw eye pin. if you happen to see this, would you please comment the size of the holes you used for the other eye pins? I would like to try and modify it.

The designer has replied

@Willis3D

I was worried about the loop but hadn't had an issue after printing many of them. I use a 1.15mm hole for the eye pins, it does hold tight but I have had no failures with that size yet. I did make a quick print profile of just the ornament with the hole cut out, I added it just a moment ago. Let me know if that helps!

@Luxendal

Boosted

Replying to @Willis3D :

Worked great with the hole in the ornament as well!

@Willis3D

Replying to @Luxendal :

Great to hear. Those turned out great!

@Luxendal

Boosted

Are the Eye Pins the screw in kind or the smooth ones? Thank you!

(Edited)

The designer has replied

@Willis3D

I use the screw i kind

@Luxendal

Boosted

Replying to @Willis3D :

Thanks! I'll get some today. Making these for my mother in law, she just got Grinch socks lol

@Willis3D

Replying to @Luxendal :

Glad you enjoy them! My MIL loved them as well.

@user_55433263

Print Profile

0.2mm nozzle, 0.1mm layer, 4 walls, 15% infill

Hard top Print balls with very fragile eyelets on top.

The designer has replied

@Willis3D

There was another user that had addressed this as well. I created another print profile with the eyelet removed and replaced with a hole for a screw in eyelet. Hope this helps!