Vertical Brush Stand

Copyright Claim

Vertical Brush Stand

Boost
224
599
27

Print Profile(2)

All
X1 Carbon
P1S
P1P
X1
X1E
A1
A1 mini

0.2mm layer, 2 walls, 10% infill
0.2mm layer, 2 walls, 10% infill
Designer
10.2 h
1 plate
5.0(20)

split for mini
split for mini
Designer
11.6 h
2 plates
4.7(3)

Open in Bambu Studio
Boost
224
599
27
28
303
157
Released

Description

Only had a small place left in craft space and needed storage for more brushes . Do to height limitations I need something that pulled out the front so it could be placed beneath my monitor. not seeing any thing like what I needed I decided to make the perfect one for my self.

 

with a small 3.5" x 3.5" footprint it can be tucked away. While still allowing easy access to all storage with the forward facing shelves at a steep enough angle to make sure nothing comes tipping out. Shelves are small to large from top to bottom with the top perfect for those fine detail brushes, and the bottom big enough to hold multiple pens. Included additional slim vertical storage on each side for those spindly tools and a cavity near the base for extra bits and bobs.

 

Boost Me (for free)

If you like the model, consider a Boost!

 

single piece no supports

vertical paint brush stand with lots of storage

4, 7.5MM slots

3, 10MM slots

2, 13MM slots

at 110MM deep 59MM wide

2, 6MM vertical slots

at 73MM deep 57MM wide

 

89x89mm base

215mm tall

Comment & Rating (27)

Please fill in your opinion
(0/5000)

Print Profile
0.2mm layer, 2 walls, 10% infill
A brilliant idea TOP
Show original
1
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
pretty big and weighs more than I thought. feels like a quality product!
1
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
printed with BambuLabs Matte Hrey.
1
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
Great idea. Accessibility and capacity without compromise.
0
Reply
Well thought design. It can hold a lot of brushes while keeping them accessible at the same time. Bottom slot could be even bigger (at least for my needs).
0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
will be useful, thanks
0
Reply
Boosted
Print Profile
split for mini
Excellent print with Bambu Lab PLA Basic, a few easily removable imperfections. Superb design. Requires the use of glue. Printed with A1 mini
Show original
0
Reply
Thanks man, turned out ace and now my desk is a little tidier.
The designer has replied
1
Reply
glad you like it
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 10% infill
cleanest print, very well done- thanks!
0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
great result
0
Reply