Fantasy Mushroom Castle by clamoraes

clamoraes

Miniatures>Architecture

GIF

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.16mm layer, 2 walls, 8% infill

Designer

8.8 h

1 plate

4.7(20)

Open in Bambu Studio

Boost

262

410

250

Released

Description

Miniature Fantasy Mushroom Castle - Lumina Shroomspire Castle

Designed with mushroom-shaped towers and spires dominating the structure. The castle's main structure is adorned with ornate details like staircases, arches, and textured walls.

“Lumina Shroomspire Castle lies in the heart of the magical Fungal Kingdom. Only the pure of heart can find the castle, where rooms reveal forgotten dreams. But a creeping darkness threatens this sanctuary, calling for brave adventurers to protect its fragile beauty and the wonders it holds.”

My test print was made with Ziro Matte Gradient filament. My first try I used supports and they broke half way of the printing, so I would recommend trying without support. (if you're scaling up the model it might need supports)

I would love to hear other opinions from their print and if you try other settings I would love to see how that worked!

Feel free to comment here also for suggestions and if you have problems with the model so I can try and fix on the original 3d model.

Comment & Rating (51)

@MayFireDesign

amazing Print and I made a video on tiktok walking inside with VR

The designer has replied

@clamoraes

That looks beautiful!! Thanks for sharing your results! The video with the VR is sooo fun!! I love it!! 🤩I am doing a few tweaks on the model and I am including your suggestions! Hope that helps! I will soon publish the updated version.

@cindybee

What filament is this? I like the fast color changes.

@MayFireDesign

Replying to @cindybee :

kingroon silk rainbow

@RexFam

Boosted

Print Profile

0.16mm layer, 2 walls, 8% infill

The print itself is absolutely stunning! so many details. i definitely recommend making it on a larger scale though. The a1 mini had a few problem spots and broken columns. my “fast” change rainbow filament sadly isn’t very fast change either. I am going to try again with a different filament and maybe slow it down a tad to see if I can get better results. Thank you!!!

The designer has replied

@RexFam

Boosted

did you know Creality is using this in one of their ads?! what a compliment! but also…I hope they asked you first.

@clamoraes

Replying to @RexFam :

Hey, your print looks awesome! Thanks for sharing your results. I am working on fixing in the model some of those more fragile parts to see if it prints better. Will upload soon (holidays slowed down this a little bit) 😂. *Oh, I didn't know at all about the Ad, it is indeed a compliment! But they actually never asked for permission. Thanks for letting me know.

@RexFam

Boosted

Replying to @clamoraes :

I will be watching close for updates! I can’t wait to print it again with a new color. it’s absolutely gorgeous! How rude of them not to ask you. They used it for a few different colors too.

@Brandonh527

Boosted

Print Profile

0.16mm layer, 2 walls, 8% infill

bought a new filament just for this print! ziro rainbow blaze

The designer has replied

@clamoraes

Beautiful colors!! Thanks for the boost and for sharing your results! :-)

@IversonDesign

Beautiful results, printed at 125%, no supports, 0.4 nozzle / 0.16 high quality, OW3D PLA Matte Rainbow Marcoron. Some parts, such as the small post elements are quite fragile and the underside of the mushrooms left some circular filament stringing needing to be removed, but all in all a delightful model to print!

The designer has replied

@clamoraes

Wow! I think this scale (125%) was spot on! It looks really good! I have a A1 mini so I can't print bigger than that! And yes, it is indeed very fragile in some parts. Thanks for sharing your results. I loved it!🤩

@chibicheese

Boosted

I love this model so much, but noticed your comments about needing to make some adjustments. I printed a 60% scale version and watched to see where some of the challenges are with the model. Even at mini scale, the underside of the mushroom cap created the most challenges. While the gills taper upwards, the outermost part of the cap dips down just enough that the printer wants to print an unsupported circle completely disconnected from the gills. On my print this fell down and looped around the stem. I can imagine it is even worse at full scale, maybe even multiple layers of this before it connects with the bottom of the gills? Hope that's helpful info. Id love to print it full scale when you've done your adjustments. Its a beautiful model!

The designer has replied

@clamoraes

Thanks for your comment and feedback! :-) I love your "mini" version and the colours! :-) I have uploaded already the new versions with some fixes on the critical/fragile parts! I hope that helps for your full scale print! Let me know! Thank you😊

@user_3670526279

Boosted

Print Profile

0.16mm layer, 2 walls, 8% infill

Top 👍🏻 A Dreamlike Model

The designer has replied

Show original

@clamoraes

🫶🫶🫶 Thanks for the boost and for sharing your results!!

@Afu_06_TR

Boosted

perfect. esun glow filamentle bastim.karanlikta çok iyi.

The designer has replied

@clamoraes

I love this glowy version!! Thanks for sharing your results! 🤩

@greenbearlabs

Boosted

Print Profile

0.16mm layer, 2 walls, 8% infill

gorgeous

The designer has replied

@clamoraes

Love it! 🤩 Glad you liked it

@iBrawnFDM

Boosted

Print Profile

0.16mm layer, 2 walls, 8% infill

Tiny loops under towers, and some parts are extremely fragile. But it’s gorgeous! I might print another one in a rainbow or something.

The designer has replied

@clamoraes

I love this filament colour! Looks great, thanks for sharing the results and rating 🫶. Yea, it is indeed very fragile in some parts. Looking forward to see the print in rainbow :)

@bryonvaught

Boosted

Print Profile

0.16mm layer, 2 walls, 8% infill

beauty of a print. no changes to settings, no supports. great job!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(1)

Description

Comment & Rating (51)

License

Related Models

Castle

Castle bookend

Neuschwanstein Castle 1

Baby Articulated Mushroom Dragon