AMS lite wall mount V2 by SPosavec

SPosavec

3D Printer>3D Printer Parts

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 5 walls, 25% infill, V2!

Designer

4.6 h

1 plate

5.0(67)

0.2mm layer, 5 walls, 20% infill, EXTENDED

Designer

4.9 h

1 plate

5.0(9)

0.2mm layer, 2 walls, 15% infill, Spacer

Designer

1.7 h

2 plates

5.0(1)

Open in Bambu Studio

Boost

379

931

184

104

745

526

Released

Description

AMS Lite - Wall Mount System.

I would like to remind you not to screw the AMS screws too tightly, otherwise they will crack, which could cause the entire bracket to come off!

Who wants to move their AMS bracket away from the wall to get more space for some extras. Here←!

Also check out all the models, you might like one. Here←!

The new version is even stronger and safer.

I printed it with PLA Basic and it turned out great, every hole is accurately aligned with AMS!
This print does not require a support and does not require any changes, except for the number of walls or the percentage of infill, which you can change if you wish, but the rest is left unchanged!

Boost Me (for free)

For more models and motivation!

Comment & Rating (184)

@Marko_G.

Boosted

Is it big enough to provide sufficient distance from the wall if I also attach that enclosure: Ultimate Filament Spool Enclosure 封箱 for AMS Lite von Supergrapher - MakerWorld Because this would be a game changer!

The designer has replied

@SebastianPosavc

I'm not sure about that, I can measure how much space there is from the wall to the spool.

@Marko_G.

Boosted

Replying to @SebastianPosavc :

That would be great. And even if the space is not big enough, There is always the option to build a spacer ;)

@SebastianPosavc

Replying to @Marko_G. :

Yes, that's right, check your private messages, I sent you something.

@St_B_3D

Print Profile

0.2mm layer, 5 walls, 20% infill, EXTENDED

The print looks very good so far, I just need to rebuild it Printed in Geeetech PLA Warm White

The designer has replied

Show original

@SebastianPosavc

Thanks for the review. Do you think the problem is with the model?

@St_B_3D

Replying to @SebastianPosavc :

I meant that I still have to put it on the wall if i have time ;) If there are any problems, I will contact you

@SebastianPosavc

Replying to @St_B_3D :

Sorry, the translator mistranslated. If there are any problems, just let me know, but I don't think there will be any. Thank you.

@Marko_G.

Boosted

Print Profile

0.2mm layer, 5 walls, 25% infill, V2!

Everything was fine! Nice design! At the End I didn't need the spacer because I got a sunlu s4 and won't print the AMS lite enclosure, but as you can see already, I was not the only one with a need for the spacer ;)

The designer has replied

@SebastianPosavc

Thanks for the review and the picture, that's why I included the spacer and the extended version for those who want a closed case. Thanks.

@Marko_G.

Boosted

Replying to @SebastianPosavc :

Yeah, I Know. I was the one asking you for the spacer because of the encloser a couple days ago ;)

@SebastianPosavc

Replying to @Marko_G. :

Yes, I remember and thank you for the suggestion.

@Parmenterjessic

Boosted

Print Profile

0.2mm layer, 5 walls, 25% infill, V2!

this was a great design and really helped me add some space to my printing area

The designer has replied

@SebastianPosavc

Wow, thank you for the review and I didn't think you would print my model so much, thank you very much. Enjoy.

@Monkeytray

Boosted

can the AMS system be mounted horizontally or would gravity affect the retraction?🤔

The designer has replied

@SebastianPosavc

It can be set up however you want, there are reviews from other people who have set it up horizontally.

@Monkeytray

Boosted

Replying to @SebastianPosavc :

thank you for your Insight😊 I've decided to go with a vertical orientation for more convenience in my my setup😅

@SebastianPosavc

Replying to @Monkeytray :

No problem, I'm here if you have any further questions

Show original

@emcy.generator

Print Profile

0.2mm layer, 5 walls, 25% infill, V2!

Great design! Fits well and feels very sturdy.

The designer has replied

@SebastianPosavc

Thanks for the review. Very nice print. Also check out the other models and give a follow and boost.

@STGLogic

Boosted

Print Profile

0.2mm layer, 5 walls, 20% infill, EXTENDED

perfect! I needed more room on my workbench and this will definitely help! printed in PETG for strength.

The designer has replied

@SebastianPosavc

Thanks for the review. Very nice print. Also check out the other models and give a follow and give a boost.

@MDvoracek90

Print Profile

0.2mm layer, 5 walls, 25% infill, V2!

Very strong model, thanks

The designer has replied

@SebastianPosavc

Thanks for the review and the picture! Also check out the other models, maybe you'll like some.

@wesleyaires

Boosted

Installed

The designer has replied

Show original

@SebastianPosavc

Wow, very nice setup. Tnx!

@wesleyaires

Boosted

Print Profile

0.2mm layer, 5 walls, 25% infill, V2!

amazing

The designer has replied

@SebastianPosavc

Thank you very much.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(3)

Description

Comment & Rating (184)

License

Related Models

Ams wall mount

Packout Wall Mount (With Catch)

Helmet Wall Mount

Adjustable Laptop Wall Mount