Terminator HueForge (Thumbs Up)
Terminator HueForge (Thumbs Up)
Print Profile(1)
Description
Still learning Hueforge, there's a lot to it. I'm pretty happy with this one so figured I would go ahead and share it. Will probably come out with another similar once I get better at it! Thanks for looking, hope you enjoy!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA Overture Red Transmission Distance: 4.8
PLA Overture White Transmission Distance: 4.4
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue Gray
At layer #13 (1.12mm) swap to Red
At layer #20 (1.68mm) swap to White for the rest.
The frame used in this picture is a creation of my own, using very little filament and a super quick print. Will hang on wall or can stand up with the stand. Easy to switch from wall to desk at any time.
Link to All-in-One frame:
https://makerworld.com/en/models/823744#profileId-767187
Boost Me (for free)
If you like my models and want to support me, please consider donating a Boost! I would be very grateful!🤗
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)