Christmas tree kit card v2 - fast print by feder

feder

Household>Decor

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

45 min

1 plate

4.6(7)

0.2mm layer, 2 walls, 15% infill

Designer

30 min

1 plate

4.6(5)

Open in Bambu Studio

Boost

126

104

Released

Description

🎄 Improved version of My Christmas Tree Gift Card is Here! 🎁

This updated design is packed with improvements:
✅ Optimized for a perfect fit
✅ Faster printing for quick holiday prep
✅ Added a handy hook to hang it on your tree
🎉 Plus, a festive touch of snow to make it truly magical!

🌟 Make Your Tree Stand Out!

📌 Note: To achieve the stunning two-color design, you’ll need a multi-material setup (AMS).

Ready to print some holiday cheer? Let’s make this season extra special!

Single color version prints in just 30 minutes!

2-color version prints in only 44 minutes on P1S with AMS.

IMPORTANT:

Please allow the print to cool down completely before removing it from the bed. Removing it too soon may result in warping of the card.

Assembly:

Assembly is straightforward. Using X-acto knife or precision side cutters is advised to get nice edges.

Just remember to rotate the topper after inserting it into top ring to secure it in place.

Boost Me (for free)

Please boost me if you like the design.
Thanks!

Bill of Materials

Bambu Filaments

Ivory White

A01-W2-1.75-1000-SPLFREE

× 1

Grass Green

A01-G1-1.75-1000-SPLFREE

× 1

Buy Now

Download BOM

Comment & Rating (15)

@sjk2712

Print Profile

0.2mm layer, 2 walls, 15% infill

printed out fine. taking it apart was pretty annoying, though. went together fairly easily once i figured out that the big tree piece in the middle was actually two separate pieces and there 3 total tree "trunk" pieces, not just two. that's on me, though, for being slow.

The designer has replied

@federnet

I have prepared.an assbly animation. It's on model page :)

@user_2062173899

Print Profile

0.2mm layer, 2 walls, 15% infill

It printed well, but was a bit difficult to get the pieces separated from the kit. I used PLA. Being a noobie, perhaps a different filament might have separated easier?

The designer has replied

@federnet

I highly suggest using x-acto/utility knife or precision side cutters to separate the pieces. I can't make the connections weaker, as thie would brake while removing the prints from print bed.

@user_2062173899

Replying to @federnet :

Duh...sorry, I didn't think of that!!

@simon.works

Print Profile

0.2mm layer, 2 walls, 15% infill

nice print, it printed great on smooth plate. I would perhaps add some instructions :)) Kids seem to have a hard time assembling it

@KrysL

Print Profile

0.2mm layer, 2 walls, 15% infill

a little thin, but very good!

@user_3162022494

Print Profile

0.2mm layer, 2 walls, 15% infill

@nicola_m

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_1896156383

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_3243987029

Print Profile

0.2mm layer, 2 walls, 15% infill

@epam_dev

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

@NateEdiz

Print Profile

0.2mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(2)

Description

Bill of Materials

Comment & Rating (15)

License

Related Models

Money Clip - fast print - only 7,6 G !

Tic Tac Toe (Fast Print!)

Shoe Stacker V2 ( fast to print)

Bag clips_ easy and fast to print