Pro Glider Plane by Random_Prints

Random_Prints

Toys & Games>Outdoor Toys

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

20 min

1 plate

3.7(20)

Open in Bambu Studio

Boost

161

120

Released

Description

A strong, sturdy, and reliable glider plane. It is small and prints very fast. Intended for use in open areas. Throw lightly for the best glide!! Enjoy!

Boost Me (for free)

Please support my designs!

Comment & Rating (31)

@Layer_by_Layer.

Print Profile

0.2mm layer, 2 walls, 15% infill

I will say I had to cut off the half the wings due to the extremely thin layer because while getting it off the print bed It cracked but, over all great design. if possible make it so it can stay in the air not go downwards immediately.

The designer has replied

@RandomAPrints

I’m sorry you had this issue. On my printer, I am able to remove the glider off the bed with no issue. Try letting the bed cool down completely before removing the glider. If you have a metal plate, it should be easy to remove without breakage. If you have a glass plate, try using ice on the opposite side to remove the glider from the plate. Because the wings were cut off, that was probably an issue for its flying capabilities. Thank you.

@Layer_by_Layer.

Replying to @RandomAPrints :

yeah it might be because I used a pen so now a five star

@Layer_by_Layer.

now is a 5 out of 5

@user_780130519

Print Profile

0.2mm layer, 2 walls, 15% infill

A bit fragile on the wings (just 1 layer) but overall fly good with some practice

@AustinOdland

Print Profile

0.2mm layer, 2 walls, 15% infill

doesn’t work

The designer has replied

@RandomAPrints

May you please elaborate. There may be problems with your print settings, printer, or an issue when printing. The small layer for the wings can cause an issue for some prints.

@AustinOdland

Replying to @RandomAPrints :

it doesn’t fly

@AustinOdland

Replying to @RandomAPrints :

my printer is fine

@Redwing30

does it fly?

The designer has replied

@RandomAPrints

If printed correctly, it should be able to fly.

@user_372174962

kind of. i had to do all sorts of tweeking to make it glide just a little.

@user_1837624914

Print Profile

0.2mm layer, 2 walls, 15% infill

it dose not have enough wight at the front.

@user_3748668307

Print Profile

0.2mm layer, 2 walls, 15% infill

it doesn’t really work :(

@user_1637806226

Print Profile

0.2mm layer, 2 walls, 15% infill

I couldn’t get mine to fly very well.

@Stadari

Print Profile

0.2mm layer, 2 walls, 15% infill

doesn’t fly great.

@Glurak2065

Print Profile

0.2mm layer, 2 walls, 15% infill

It doesn't fly so well 😔

Show original

@user_1270084478

Print Profile

0.2mm layer, 2 walls, 15% infill

It doesn't fly, it falls :)

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.