NEW! (09-12-24) Bathroom single grate soap dish based on this design is now available here 

UPDATE 06 12 24 - I have added a new stl to this pack - an end piece should you just want to have the grates and no organiser or maybe a combo of both.

This is the Large Sink Back Draining Board. For the DEMI SINK BACK DRAINING BOARD https://makerworld.com/en/models/858585#profileId-808337 

FEATURES

• Snap in Grills and Organiser - Arrange how you wish
• Internal decline to encourage water flow to spout
• Right Hand Spout empties into Sink
• Easy to Clean
• Customisable
• Large Sized (Double sink width or Sink + Draining Board sized) Height 30mm x Width 985mm x Depth 90mm 

DEMI SINK BACK DRAINING BOARD LINK  https://makerworld.com/en/models/858585#profileId-808337

This is the large version that is suitable for both the sink and draining board. A smaller, Demi (Small) Sink Back Draining Board can be found here)

You can download the grates/soapdish, organiser and end grates here as an separate 3mf file and stl https://makerworld.com/en/models/849395#profileId-797023

So this was a personal project to solve an issue of space and to generally tidy up the communial sink. What I've done is create a 985mm 90mm two lane draining board for that space behind the sink that constantly gets wet and is never properly utilized.

The dimensions are H 30mm x D 90mm w 985mm.  Please note that the soap dish/grill and organiser are designed for for my needs so I didn't make a grill that goes all the way along the draining board. If anyone would like me to make some more pieces so that the entire drain can be covered then let me know in the comments and I'll hop to it.

I have uploaded a horizontal and a vertical print of the main draining board as I think printing horizontally is better for water flow (the groves run with the flow of water) but printing vertical uses much less filament.

You will also find some grates/soap dish and an organiser that slots into the main drainage board (See Pics). Under the board you will see markers to idicate which part should be glued to which (A to A, B to B etc). I used superglue to fix the pieces together but you can use plumbers plastic glue too. Just leave overnight to properly stick and seal so there are no leaks. I've made mine for a right hand sink but if you mirror the main drain it'll work for a left hand sink just fine.

There's a slight fall from one end to the other to aid water flow and a spout to ensure that the water is properly directed once it leaves the draining board.

I printed the main drain in Elegoo Rapid PLA and the soap dish and organiser in Bambu matte black and both come out fab. I would recommend a smooth plate for the drain itself and a textured plate for the soap dish. You'll see why when you open the 3mf files.

One more thing. For some reason Bambu Studio wouldn't let me collate all the various files into one 3MF file so I've had to upload the items as follows.

241124 Mini Draining board Horizontal print - Main Draining board (4x parts) to be printed horizontally

241124 Mini Draining board Vert Print - Main Draining board (4x parts) to be printed Vertically

241124 Mini Draining board SoapDish and Organiser - The Soap Dish and Organizer.

+ various corresponding STLs INCLUDING NEW END PIECES - SEE UPDATE

Any questions please ask.