Project: Ghost In The Shell.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 191.26x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.4
PLA BambuLab Basic Blue Transmission Distance: 3
PLA BambuLab Basic Beige Transmission Distance: 3.8
PLA BambuLab Basic Red Transmission Distance: 4.1
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Blue
At layer #11 (0.96mm) swap to Beige

Border Only Colors from here until the end.
At layer #17 (1.44mm) swap to Red for the rest.