This is one of the 3D models that came with the Deluxe Edition pre-order of Goat Simulator 3. The file needed to first be converted to an STL file. The stand and Pilgor were separate from one another so I situated them together into the proper trophy you'd find in the game. The default size for the print is 7 inches in height and I printed that using Sunlu PLA Silk gold filament at 0.16mm layer height with 2 wall loops and 15% Gyroid infill. I arranged the seam near the back of the model, it looks much better than when I arranged the seams in a random manner. Printing with organic tree supports with “On build plate only” and “Support critical regions only” disabled. The supports were fairly easy to remove, even around the tongue and tail.