Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
3.6 h
1 plate
Open in Bambu Studio
Boost
3
10
0
0
1
0
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 155x228.37mm in size
You may print at higher layer heights below the Min Depth of 0.72mm
The Max Depth is 2.5mm and the Actual Depth is 2.6mm
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Dark Brown
At layer #13 (1.12mm) swap to Jade White
At layer #20 (1.68mm) swap to Orange
At layer #22 (1.84mm) swap to Red for the rest.
Boost Me (for free)
If you enjoyed this print, please give me a boost thank you
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)