Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 199.17x200mm in size
You may print at higher layer heights below the Min Depth of 0.72mm
The Max Depth is 2.5mm and the Actual Depth is 2.6mm

This print uses 5 filaments

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to White
At layer #21 (1.76mm) swap to Blue Gray
At layer #23 (1.92mm) swap to Orange
At layer #28 (2.32mm) swap to Red for the rest.