ams lite adapter for sunlu spool by Sir.Dalsy

Sir.Dalsy

3D Printer>3D Printer Accessories

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.28mm layer, 3 walls, 15% infill

Designer

57 min

1 plate

4.2(10)

0.2mm layer, 3 walls, 10% infill, support

Designer

1.4 h

1 plate

Open in Bambu Studio

Boost

Released

Description

This adapter is designed to make Sunlu spools compatible with the AMS Lite. For full functionality, you'll also need the adapter for Bambulab refills, which you can find on my profile or at this link.

Note:
This spool-to-AMS adapter is specifically intended to be used together with the refill-to-spool adapter, as it is designed to accommodate the increased spool width.

Comment & Rating (20)

@lucky_garages

Print Profile

0.28mm layer, 3 walls, 15% infill

A tad excessive, yet functional

The designer has replied

Show original

@Sir.Dalsy

The adapter is not the right length because you're not using my adapter for Bambulab refills.

@lucky_garages

Replying to @Sir.Dalsy :

And what would that be, could you provide a link

Show original

@Sir.Dalsy

Replying to @lucky_garages :

https://makerworld.com/models/598228 Here’s the link. If you can’t copy it, you can go to the description of the printed model. In the description, you can click on the word "link" and it will take you to the project.

@user_2577423778

Print Profile

0.28mm layer, 3 walls, 15% infill

Spins around freely inside the spool, will try to heat the item to make it wider, so the spool fits snug.

@user_1325704262

Boosted

Print Profile

0.28mm layer, 3 walls, 15% infill

fantastic fast print

@user_3025312382

Print Profile

0.28mm layer, 3 walls, 15% infill

@Bedslinger

I must be doing something wrong as these slide off my new AMS Lite with almost no force required. The three prongs on the AMS do not go through the adaptor enough for them to lock the spool in place... Any suggestions?

The designer has replied

@Sir.Dalsy

If you're printing with Bambu Studio, you could try adjusting the x-y hole compensation, as the filament you're using might have more shrinkage. Mine didn't give me any problems.

@Bedslinger

Replying to @Sir.Dalsy :

Thank you, I'll try that.

@creklaw4477

Print Profile

0.28mm layer, 3 walls, 15% infill

Quick, easy print that works exactly as intended. This model is my go to for adapting odd spools to the AMS lite. Thabks for sharing!

The designer has replied

@Sir.Dalsy

thank you so much

@user_576992900

Do not fit, there is too much space between spool and adapter. Consider rebuild ;)

The designer has replied

@Sir.Dalsy

Thank you for your feedback. I will take care of resolving this issue.

@user_1428876719

Boosted

Print Profile

0.28mm layer, 3 walls, 15% infill

works great but still allows some slippage on some filament spools.

@ds2kcivic

Boosted

Print Profile

0.28mm layer, 3 walls, 15% infill

Doesn't quite fit as well as I'd hope. Falls out easily. Works in a pinch.

@user_1325704262

Boosted

fantastic print and super fast

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

AA to C Battery adapter

canalino86

277

125

Print Profile(2)

Description

Comment & Rating (20)

License

Related Models

AA to C Battery adapter

AMS Lite RFID Adapter Holder

Creality Spool Adaptor

AMS Saver Spool - fits Bambu reusable spools