Just some fun Art deco inspired wall hangings. I refer to them as Chaos Deco prints. my Adhd brain just get free reign lol I was asked to put them up so here they are! Have a blast with them! 

I use Amolin S-series to achieve the color and shading but any tri color will work splendidly!

I wouldn't mess with my Line width and First layer speeds they are set very specific.

If lines aren't connecting then try upping the flow rate within the 1.02 to 1.06 range to help. 

I would use super dry filament and have a good wiper to help with any hair stringers.

If you do get a bunch of hair stringers just use a soft nylon brush and use small fast circular motions to move or remove any nasty stringers. I do this during the first color change.   

This is meant to be made on a high temp slick or FX plate but should work fine on any plate just be warned the bed temp is set at 65C

Thanks for looking and any other issues just message me here!