This Spinner fits this great model "High Speed Propeller Launcher" from the designer Lukas Hannert: https://makerworld.com/en/models/628601?from=search#profileId-553231 which is also much fun with the propellers, but now that winter is coming, I made a spinning top for my son, which became a project over many days and many iterations to optimize it´s spin time.

This is a easy print that does not need Brim or Supports. Print this model 100% solid. The voids are there by design to keep the weight on the outside, so I chose many wall loops to make sure it´s all filled. You can also fill with 100% infill, but I saw the print time is a bit longer, so I went with the walls in the provided print profile.

Spintimes over 3 minutes are easily possible, especially if you spin on a smooth surface like a ceramic oven top or simmilar. If the tip does not print perfectly, you can sharpen it with a knife or file that also improves your spin time.

0.4mm Nozzle
0.2mm Standard Profile with
No Supports, No Brim

Also check out my new version of a Futuristic Spinning Top

https://makerworld.com/en/models/876591#profileId-829671

Also check out my other models click on this text!

All my Cans:

Monster Can: https://makerworld.com/en/models/921297#profileId-883437

Red Bull Can: https://makerworld.com/en/models/910553#profileId-871340

Pepsi Max Can: https://makerworld.com/en/models/915064#profileId-876506

Pepsi Classic Can: https://makerworld.com/en/models/919728#profileId-881661

Diet Pepsi Can: https://makerworld.com/en/models/937235#profileId-902304

Coke Classic Can: https://makerworld.com/en/models/906741#profileId-866936

Coke Vintage Can: https://makerworld.com/en/models/942342#profileId-908332
Coke Christmas (Polar Bears): https://makerworld.com/en/models/822095#profileId-765310
Coke Christmas (Santa): https://makerworld.com/en/models/811761#profileId-753261

Dr Pepper https://makerworld.com/en/models/927974#profileId-891335

BIG Coke Can Classic https://makerworld.com/en/models/926993#profileId-890146

Please wash your build plate with dishwashing liquid and touch it only on the edges to minimize the oil on it (alcohol just does not work the same) for the best layer adhesion!