Burning Punisher HueForge by fD.667

fD.667

Generative 3D Model>Hueforge & Lithophane

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

Size 150x150 - 0.08mm layer, 2 walls, 100% infill

Designer

2 h

1 plate

5.0(3)

Size 200x200 - 0.08mm layer, 2 walls, 100% infill

Designer

3.2 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

Released

Description

You can choose of the two profiles & .stl

150x150 or 200x200

Print settings (colors) are identical.

Nozzle: 0.4
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.
You may print at higher layer heights below the Min Depth of 0.72mm The Max Depth is 2.1mm and the Actual Depth is 2.1mm.

These were my settings and colors for my print that you see in the picture. Your results may be depending on the filament you use.

Filaments Used:
PLA Elegoo + Black Transmission Distance: 0.3
PLA Sunlu META Grey Transmission Distance: 3
PLA Elegoo + Red Transmission Distance: 3.7
PLA Elegoo + Yellow Transmission Distance: 4
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Grey
At layer #13 (1.12mm) swap to Red
At layer #17 (1.44mm) swap to Yellow for the rest.

Comment & Rating (11)

@Trobinou

Print Profile

Size 150x150 - 0.08mm layer, 2 walls, 100% infill

My first painting! Great model that helped me discover this principle 👍

The designer has replied

@fD.667

Excellent print and colors :), thanks

Show original

@Junma

Print Profile

Size 150x150 - 0.08mm layer, 2 walls, 100% infill

Great print.

The designer has replied

@fD.667

:) thx

@user_3737275584

Print Profile

Size 200x200 - 0.08mm layer, 2 walls, 100% infill

Printed great with no issues.

@Trobinou

Hello, could you tell me what's the "Transmission Distance" ?

The designer has replied

@fD.667

Hey, is a measure of how much light filament lets through. Each filament (manufacturer and color) has a different value. In principle, you will have Red with TD 2.4 = then you have to print 3 layers of 0.08 so that it "has" the correct color on a different background. Everty model takes value specified during creation. If you use a "similar" color with a different TD than specified. The result will be "little" different than the autor ;).

@Trobinou

Replying to @fD.667 :

Thank you very much for taking the time to respond to me. I had never really asked myself this kind of question, I generally focus more on the aspect of strength. I better understand why you provide all these details for printing, it is indeed important. However, sellers are rather stingy with technical data, and although Bambu Lab is one of those that provide the most data about their filaments, this information does not appear in their Technical Data Sheet. How did you find this information for Sunlu and Elegoo filaments?

@fD.667

Replying to @Trobinou :

Even when the manufacturer provides this information, it still over time changes :). Each production batch is slightly different. I’ve never encountered a color with consistent TD or even the exact color (shade) same. However, the differences are minor. Here’s a link to the database with some filaments https://3dfilamentprofiles.com/filaments. And I always do these two tests: https://makerworld.com/en/models/530439#profileId-447255 and: https://makerworld.com/en/models/84566#profileId-90403