Cherry Blossom Bookmark - HueForge by Flohsen24

Flohsen24

Generative 3D Model>Hueforge & Lithophane

Print Profile(5)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

CoreXY, AMS, 0.4 Nozzle

Designer

1.3 h

1 plate

5.0(149)

A1mini, AMS, 0.4 Nozzle

Designer

1.5 h

1 plate

4.9(43)

AMS, 0.4mm nozzle, 0.08mm layer, 1 walls, 100% infill

1.3 h

1 plate

5.0(90)

0.2mm nozzle, 0.04mm layers

6.4 h

1 plate

4.9(7)

Click to see more

Open in Bambu Studio

Boost

1350

2922

444

522

2.3 k

1.5 k

Released

Description

Hello Makers,

this is my first upload. I like to work with HueForge, so it has also become such a model. :-)

It is a bookmark in the size 44x160mm. It needs 3 colors, in the profile it is set to an AMS. Otherwise the filament change must be converted into a pause. (Afterwards manual unloading and loading)

Happy printing !

The print profile has been adapted to the Hueforge. I would suggest not to change to much. (Precision & Print Speed)

Printing tips
- Do not simplify the model.

- Dont scale the Z-Axis, otherwise the color layers no longer fit. Apart from the Z-axis, the model can be scaled as desired.

- If a message regarding floating objects appears, this can be ignored. (Standard from a HueForge export)

- The profiles are set to an AMS. Otherwise the filament change must be converted into a pause. (Afterwards manual unloading and loading)

Other colors can also be used, this is entirely up to your creativity. However, there is something to bear in mind.

Filament Guide
The ideal filament PLA and PLA+ (glow also possible if suitable)
Only use PETG if you want to create a glossy effect on one color layer.

PETG, Silk and Matt filaments let very little light through, so you have to test this for each model. These filaments can be used for the final colour change for a finish.

About this image
The image used was created by myself. After creation, pre-processing, post-processing, it was scaled up and processed in HueForge.

Printing Instructions - AMS
- Just Plug & Play, choose your 3MF and Print !

Printing Instructions - NO AMS - Use manual pause between Layers.

HueForge Print & Swap Description

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 44x160mm in size

Filaments Used:
PLA+ Jayo Black Transmission Distance: 0.5
PLA Sunlu White Transmission Distance: 7.2
PLA Sunlu Red Transmission Distance: 5.8

This print uses 3 unique filaments

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to White
At layer #15 (1.28mm) swap to Red
At layer #21 (1.76mm) swap to White for the rest.

Would you like more ? Then take a look at the other projects
All my Models ->
3D Art Collection by Flohsen24

Year of the Snake Design Contest
Year of the Snake Bookmark - Happy New Year 2025

Boost Me (for free)

If you would like to support me, please leave a boost. Many thanks !

Comment & Rating (444)

@wjanzen

Boosted

Print Profile

CoreXY, AMS, 0.4 Nozzle

I used blue pla glow in place of the red on my second print, and I'm really pleased with it. I also accidently swapped black for red sparkle which worked out and looks okay, but might lead to some glittery pages.

The designer has replied

@wjanzen

Boosted

I really like the red in place of the black when held up to the light

@Flohsen24

I am impressed by the creativity of the makers

@robotizen

This is amazing 😍🫠

@user_795169323

Boosted

Print Profile

AMS, 0.4mm nozzle, 0.08mm layer, 1 walls, 100% infill

Nice print. Love the details. Might try it with magenta instead of red next time.

@Flohsen24

Also here, plz. share your print with updated colors :-)

@Flohsen24

I also really like it with other colors. Thanks for trying it out

@lukethevegan

Print Profile

0.2mm nozzle, 0.04mm layers

Love the design, it’s stunning. Unfortunately had some issues with warping and my initial print failed because of this. But after tweaking the print profile it printed perfectly for me.

@Flohsen24

Thanks for the review, a few tips about warping: A1 Series - open printer Lower the print bed temperature, 65 degrees is too high. CoreXY Series - enclosed printer The door can be opened a gap. As always, pay attention to the print bed adhesion. Cleaning the plate in advance

(Edited)

@lukethevegan

Replying to @Flohsen24 :

No worries! That’s great to know, thank you so much. I’m new to 3D printing so I was wondering why that happened and how to prevent it :) I also used the 0.2 nozzle and it looks amazing

@Flohsen24

Replying to @lukethevegan :

hi, thanks for the feedback. That's an important tip about the 0.2 nozzle. As the print object is very thin, there is a risk of warping even with long printing times. This bookmark is printed on a 0.4 Nozzle in 1 hour, the 0.2 will need about 3 hours. here the print bed temperature must be lowered to 45 degrees. I had intended to create a 0.2 nozzle profile all along, I just haven't got round to it yet.

@kitsunemagic

Print Profile

CoreXY, AMS, 0.4 Nozzle

My first hueforge print, I think it turned out really well, but I'd like to find a more transparent white, my white PLA seems to be pretty opaque. otherwise definitely going to try again when i get some magenta.

The designer has replied

@Flohsen24

thanks for the rating. the white used does not let enough color through. Do not use matt or silk filaments. PETG would also be possible, but only if you want a glossy effect.

@kitsunemagic

Replying to @Flohsen24 :

The only white I have right now is the Inland white, we have to get another white that is more transparent. I got all this for Christmas, so I'm trying things out and getting used to how everything works.

@HiSnowy

Boosted

Print Profile

0.2mm nozzle, 0.04mm layers

perfect xmas present for the fam!

@Flohsen24

thanks for the rating, i'm glad to hear it

@user_2932024934

Boosted

Print Profile

CoreXY, AMS, 0.4 Nozzle

Thank you for this fantastic template! I only had "desert tan" instead of white and orange instead of red, but the result is simply magnificent!

The designer has replied

Show original

@Flohsen24

Thanks for the review, nice to see that it works with many color combinations :-)

@user_2105669927

Boosted

Absolutely amazing print, nice gift for my daughter and her friends. Thank you

The designer has replied

@Flohsen24

Have fun giving the gift, thanks for the rating

@Lynchmom3

Print Profile

AMS, 0.4mm nozzle, 0.08mm layer, 1 walls, 100% infill

Great profile! Printed very nicely on P1S. Used Inland PLA+ in white, true red, and black.

@Flohsen24

Also very nice to look at!

@Lynchmom3

Replying to @Flohsen24 :

thank you

@user_3006423374

Boosted

I’m in Awe. the most lovely print I have ever done. I drilled a small hole to attach the tassel purchased from Amazon.

The designer has replied

@Flohsen24

Thanks for sharing the picture. I haven't seen it hanging on the tree either :-)

@user_355778402

Boosted

Print Profile

CoreXY, AMS, 0.4 Nozzle

Exceptional contrast. Spectacular rendering. I printed several to give as gifts. Unfortunately, the photograph does not at all capture the actual rendering and three-dimensional depth

The designer has replied

Show original

@Flohsen24

Thank you for the Support !

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Cherry blossom bookmark - A Secret Place

Flohsen24

113

182

318

Print Profile(5)

Description

Comment & Rating (444)

License

Related Models

Cherry blossom bookmark - A Secret Place

BookMark_Cherry Blossoms_Hueforge

Cherry blossom bookmark - In the shadow of sakura

Cherry blossom bookmark set - Cherry blossom magic