Scraper v1 by franceschellifedericoMakerWorld: Download Free 3D Models

franceschellifederico

Tools>Other Tools

IP Report

GIF

Print Profile(9)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

Bambu Body Only - 0.2mm layer, 3 walls, 15% infill

Designer

53 min

1 plate

4.9(201)

Basic End Only - 0.2mm layer, 3 walls, 15% infill

Designer

16 min

1 plate

4.9(190)

No Logo Version - 0.2mm layer, 3 walls, 15% infill

Designer

5.8 h

1 plate

4.9(135)

BambuLab Version - 0.2mm layer, 3 walls, 15% infill

Designer

6.1 h

1 plate

4.9(199)

Click to see more

Open in Bambu Studio

Boost

1129

2297

1031

298

5 k

4.5 k

Released

Description

NOTE: USE MY PRINT PROFILE FOR BETTER RESULTS!

NOTE2: TOLLERANCE ARE CALCULATED FOR BAMBU PLA.

If you have any suggest, please don't esitate to leave a comment :)

Tip: Print the body and the final part in two different times if you don't want to waste time due to the AMS filament change :o

A re-usable scraper with a different end for any purpose!

I've designed a 3D-printable scraper tool that serves multiple purposes: cleaning and removing models from the printer bed after use and also for removing ice from car windshields during winter! What's unique about my scraper is the interchangeable end piece, offering a choice between three models: one for cleaning the printer bed, another for lightly iced glass, and the third for heavily iced glass.

Additionally, there's a slot (on the back) for 15x3mm magnets, allowing it to be attached to the side of the printer.

Green: lightly iced glass,

Blue: heavily iced glass,

Orange: cleaning the printer bed.

Comment & Rating (1031)

@BennyBoots

Print Profile

Basic End Only - 0.2mm layer, 3 walls, 15% infill

this is probably the best scraper there is. the replaceable blades, that alone, is a terrific design. thank you. i may try printing the blades in petg to see if those are even stronger and maintain their sharpness better.

The profile uploader has replied

@franceschelli

thank you 🙏

@user_959467284

try printing it in PLA-CF or PETG-CF. It greatly improves durability and strength.

@BennyBoots

Replying to @user_959467284 :

I'll give that a try, good idea

@user_3748781154

Print Profile

Bambu Body Only - 0.2mm layer, 3 walls, 15% infill

Nice design. Unfortunately the handle broke off while installing the end part. Probably used to much force.

The profile uploader has replied

@franceschelli

i'm sorry to hear that, what pla are you using? with bambu pla the end part goes in very easly

@franceschelli

you should try to print again the end part only using the x-y compensation.

@user_3748781154

Replying to @franceschelli :

I used Sunlu PETG for the handle. Will try again with your tips.Thanks.

@schiggy

Print Profile

Basic End Only - 0.2mm layer, 3 walls, 15% infill

fast good Print, but the tolerance works Not for every Material.

The profile uploader has replied

@franceschelli

Did you read the description?

(Edited)

@schiggy

Replying to @franceschelli :

jep, i read the discription. i used pla from another Brand and wrote an obejctive Review. no Need for u to be mad. normaly u can use every pla and its working. if u cant deal with such an review, than Report instead of working on Modell so everyone get good results.

@franceschelli

Replying to @schiggy :

I think you are a novice, it is clearly written in the description that the tolerances are calculated for Bambu pla. if you have a different pla then change the x-y compensation instead of complaining. I hope I have been of help to you 😃

(Edited)

@ioio72

Boosted

Print Profile

No Logo Version - 0.2mm layer, 3 walls, 15% infill

This one is great! Thanks a lot! (I'll boost this design, as soon as possible.)

The profile uploader has replied

@franceschelli

thank you ☺️

@user_2539260316

Made it with a Elegoo Neptune 4 with completely random PETG Filament and it work really really well. The best design i ever saw, very sturdy, stylish and with the replacable blade it's even better. For those who are not using Bambu printer and filament, maybe a little sanding to make the blade and the handle fit better. Well done ! ^^

@pepeagu

Print Profile

BambuLab Version - 0.2mm layer, 3 walls, 15% infill

the best!

The profile uploader has replied

@franceschelli

thank you 🙏

@emanuele.10392

Print Profile

Basic End Only - 0.2mm layer, 3 walls, 15% infill

Ottimo

The profile uploader has replied

@franceschelli

grazie

@suaimondi

Print Profile

BambuLab Version - 0.2mm layer, 3 walls, 15% infill

Perfect used for ice on my car!

The profile uploader has replied

@franceschelli

grazie 🙏

@griffinsinn

Print Profile

Bambu Body Only - 0.2mm layer, 3 walls, 15% infill

Great scraper!

The profile uploader has replied

@franceschelli

thanks

@JorSaFe

Print Profile

Bambu Body Only - 0.2mm layer, 3 walls, 15% infill

the best tool

The profile uploader has replied

@franceschelli

thanks

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.