Sanding Block (3.6" x 3" Sandpaper)
Sanding Block (3.6" x 3" Sandpaper)
Print Profile(1)
Description
Overview
The sanding block holds 3.6" by 3" [91 x 76 mm] sandpaper which can be cut from common sheet sizes such as 3x 3.6" by 9". The block has a 90-degree corner and a 0.5" radius for sanding different edges. This sanding block is designed to only use printed parts.
Materials and Printing
Materials such as PLA or PETG are suitable.
- 2-3 walls
- 5-10% infill
- No support
Assembly
Materials
- Bottom
- Bottom Thread
- Handle
- Handle Lock
- 3.6" by 3" [91 x 76 mm] sandpaper sheet
Instructions
Slide the Bottom Thread part into the Bottom. Optionally, add super glue to fix it permanently.
- Wrap sandpaper around the bottom assembly.
Install the handle over the assembly and move the sandpaper to clamp tightly.
Lastly, thread on the Handle Lock to clamp down the sandpaper.
- Ready to start sanding!
Boost Me (for free)
Add a boost if you like this model!
Check out other models
Print-in-place organizer | Print-in-place pill organizer |
 |  |
AMS and external spool adapter | 3 day pill organizer |
 |  |
Bill of Materials
- Sandpaper x 1: 3.6"x3"
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)